The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Lava Yuva 3 Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Lava Yuva 3 device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove four-screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Lava Yuva 3 device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.

Top 12 Prominent Lava Yuva 3 Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Lava Yuva 3 can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Lava Yuva 3 fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Lava Yuva 3 device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Lava Yuva 3 device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Lava Yuva 3 device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Lava Yuva 3 device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Lava Yuva 3 device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Lava Yuva 3 fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Lava Yuva 3 device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Lava Yuva 3 device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Lava Yuva 3 device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Lava Yuva 3 fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Lava Yuva 3 device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Lava Yuva 3 device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Lava Yuva 3 fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Lava Yuva 3 .

How to Remove a Previously Synced Google Account from Your Lava Yuva 3

The setting up process of a new Android phone requires you to add a Google account that saves all activities and data of the phone like search history, details of online shipping, play store purchases, and more. Once the account is set, it cannot be changed till you delete everything from your phone. Moreover, with the introduction of FRP lock, even a factory reset will not remove the synced Google account.

So, now what if you want to sell your phone or have purchased a second-hand device that is still associated with the previous owner’s Google account? No, worries as there are workarounds available that will help you remove your previously synced google account from your Android device.

Keep reading to know more in detail about how to bypass previously synced google accounts.

Heres a full guide on how to remove google account from android, click to know more!

Part 1: Remove Previously Synced Google Account from Android Phone Without Phone Reset

In this part, we will discuss the methods that can be used for removing the previously synced account from your Android phone without a phone reset.

Method 1: Removing Google Account using the Android Settings Menu

If you just plan to reset your phone, maybe because of the lag caused by the phone cache, and you know the inconvenience of Google FRP as a protection mechanism, then you can remove Google FRP through the Settings menu.

The steps for this method are listed below.

• Step 1: On your Android phone go to the Settings option and choose Accounts & Backup.
• Step 2: Select the Manage Accounts option now and the list of the associated Google Devices will appear.
• Step 3: Choose and click on the Google Account that you want to remove and a pop-up message will appear to inform you that all the account data will be deleted with this action.

To confirm the removal of the account, click on the Remove account button.

Method 2: Remove the Google account from the Android phone using the computer

There is another method using which you can remotely remove the Google account associated with your phone. The steps for the method are listed below.

• Step 1: Using another device or a PC, sign in to your Google account that was previously synced on this device and choose the Security option.
• Step 2: Next scroll down and then tap on the Your devices option and choose to Manage devices.
• Step 3: You will now see the list of devices linked to your Google account. Next, tap on Find a lost or stolen phone and then select the Remove option present next to Account access.
• Step 4: You will be again asked if you want to delete the account. Select the Remove option.
• Step 5: The account will be removed successfully and the confirmation message will appear.

Note: This method will actually sign out you from the Google account and will not delete it permanently. To again get access to the account, a notification will appear on your phone to enter the password.

Part 2: How to Disable Factory Reset Protection to Bypass Google Account Verification After Factory Reset

The Factory Reset Protection (FRP) is a security feature for the Android device that allows factory reset only after the associated Google ID and password are entered correctly. With multiple accounts and passwords to remember there is quite a possibility that you may forget your Android phone Google account details and here the need to bypass Google account verification arises.

Though there are multiple tools available we recommend Dr. Fone - Screen Unlock (Android) as the best and the most reliable option. Using this excellent Windows and Mac-based software, FRP lock on all popular Android devices including Samsung, LG, HTC, and others. The tool is simple to use and requires no technology. There is also an option where you can unlock your device if you do not know the OS version.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

• 4 screen lock types are available: pattern, PIN, password & fingerprints.
• Easily remove the lock screen; No need to root your device.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Steps to remove FRP lock using Dr. Fone-Screen Unlock (Android)

Step 1: Download, install and run the software on your system, and from the main interface choose the Screen Unlock option. Make sure that your phone is connected to WiFi.

Step 2: Next, choose Unlock Android Screen/FRP and then select the Remove Google FRP Lock option.

Step 3: Next, choose the OS version of your device from the given options, and then using a USB cable, connect your phone to your system.

Step 4: After the Lava Yuva 3 device is connected, the Lava Yuva 3 device information will appear on the software for you to confirm and the notification for the same will be sent to your Android phone.

Step 5: Now follow the notifications for removing the FRP lock and in the browser enter drfonetoolkit.com.

Step 6: Next, click on the Android 6/9/10 button, choose Open Settings and select the PIN option to set a PIN to be used in the further steps.

Step 7: Keep following the steps as they appear till you reach the Google Account Sign-In page. Here click on the Skip option that will successfully remove and bypass the Google Account.

The above given are the brief steps for the FRP bypass process. To learn about the entire process in detail, check Dr.Fone-Screen Unlock (Android) guide .

Part 3: Hire a Remote FRP Removal Service to Bypass ZTE/Motorola After Factory Reset

To bypass the FRP lock on your ZTE, Motorola, and Samsung device, there is also an online service called UnlockJunky.com that claims to remove the FRP lock and previously linked account on your Android device within 5-15 minutes. This is a paid service that also claims that if they are unable to remove the lock, they will refund the amount to their customers.

So, if you cannot sign in with a Google account that was previously synced, you can give this, method a try.

Step 1: Open the official service page Unlockjunky on your browser.

Step 2: Next, choose the Lava Yuva 3 device’s brand, model, and unlock type from their respective drop-down menus. Click on Unlock Now button after entering the details.

Step 3: Now you need to initiate the order by providing the details asked and completing the payment.

Step 4: Next, the software needs to be downloaded and installed on your system, and using a USB cable, connect your phone to your computer.

Step 5: Connect with one of the support provider members through the live chat and they will help you remove the FRP lock on your Android phone.

With the steps above, you can remove the account previously synced on this device.

Limitations of using the Unlockjunky method:

• This is a paid service.
• Works only with Motorola, ZTE, and Samsung devices.
• There is no surety that the service will work for removing the FRP lock on your devices.
• If you have to remove the FRP lock from multiple devices, a separate payment for each device has to be done.

Conclusion

Above we have listed several ways to remove a previously synced Google account on your Android device. The best of all the listed solutions is Dr. Fone - Screen Unlock (Android) as it supports bypassing FRP lock on multiple Android devices in a hassle-free manner. Once the license is purchased, you can unlock as many numbers of devices as you want without any worries.

Also read: