The Ultimate Guide How to Bypass Swipe Screen to Unlock on Lava Agni 2 5G Device
The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Lava Agni 2 5G Device
Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Lava Agni 2 5G device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.
So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.
Part 1: How to disable Swipe Screen to unlock when you can access the phone?
Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.
Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.
Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.
Step 2: Out of those, choose the “Security” tab to access your further.
Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.
Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.
Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”
That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.
Part 2:How to remove/bypass Swipe to unlock when the phone is locked?
To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.
The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.
Dr.Fone - Screen Unlock (Android)
Remove 4 Types of Android Screen Lock without Data Loss
- It can remove four-screen lock types - pattern, PIN, password & fingerprints.
- Only remove the lock screen. No data loss at all.
- No tech knowledge asked. Everybody can handle it.
- Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.
4,008,669 people have downloaded it
Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.
Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.
Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.
Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.
Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.
Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.
Part 3: How to turn off the swipe to unlock when the pattern is enabled?
In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Lava Agni 2 5G device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.
The steps below imply turning off of swiping screen instantly:
Step 1: At first, open the app “Setting” present on your Android device.
Step 2: There will be multiple interfaces. Now choose the option “Security.”
Software Update Pro - Check and update software installed on your computer.
Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”
Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.
Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.
Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.
Conclusion
Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.
How To Easily Unlock Lava Screen?
If you’ve ever had a Lava phone, then you know that their screens are locked by default. It can be a pain if you want to access your messages or change your background image quickly. If you just set your Lava password, screen lock code, pattern lock, or PIN last night or a few days ago, you are most likely to forget it.
The result is that you have locked out of your phone, and you have to reset your device’s password. But fortunately, there’s an easy way to unlock your Lava screen without entering any passwords. You can have your phone up and running in a few simple steps without contacting customer service.
So don’t wait any longer - read on for instructions on how to unlock the Lava phone pin code.
Let’s get started!
## 4 Easy Ways To Unlock Lava ScreenLike most people, you probably lock your Lava phone as soon as you turn it on. It’s a good way to keep your phone safe from prying eyes and accidental button presses. But what happens when you forget your phone’s passcode? Or worse, what if your phone gets locked by a malicious app?
There are a few different ways to unlock your Lava phone. We’ll show you how to do it.
Method 1. Google Find My Device (Without Password/Pin/Pattern)
If you’re like me, you’ve probably tried a million different ways to unlock your Lava phone, only to be frustrated by the results. Luckily, there’s an easy way to unlock your Lava phone using Google’s Find My Device feature.
Google will use your location, phone information, and connection log to find your Nokia.
Follow these steps to unlock the Lava lock screen password without losing data:
- Step 1: Sign into your Google account and navigate the Find My Device website.
- Step 2: Sign in with your Google account, which you used on your locked Lava phone.
- Step 3: The Android Device Manager dashboard will show your locked Lava with three options: Ring, Lock, and Erase.
- Step 4: Simply click on “Lock”.
- Step 5: Enter a password that is not your Google account password in the “New Password” field.
- Step 6: Type the new password in the “Confirm password” field. This password lock will replace the current lock screen.
- Step 7: You can leave the “Recovery message” field empty or type anything in it.
- Step 8: Enter another phone number in the “Phone number” field, although this is optional.
- Step 9: Choose “Lock” after entering your password and filling out the optional fields if you wish.
- Step 10: If the process is successful, you will receive the unlock code within a few seconds.
- Step 11: Navigate to the “Screen Settings” menu after unlocking your device.
- Step 12: Use a new password; you can use the temporary password if you want.
You can use it to unlock your Lava if you have activated the Android Device Manager or Google Find My Device before your phone was locked.
A few conditions, however, must be met for this to work
- You must turn on your Lava phone.
- Before locking your phone, you must activate Google Find My Device or Android Device Manager.
- You must have your Lava GPS turned on to use it.
- You must be connected to WiFi on your device to log into your Google account.
- Your phone needs to be set to location.
Method 2. Unlock Lava Lock Screen With Hard Reset
If you perform a hard reset on your Lava lock screen, all data, and user information will be erased, including your screen lock, password, pattern lock, and PIN.
Follow the steps below if you want to know how to unlock the Lava phone keypad with the hard reset, follow the steps below.
- Step 1: Turn off your Lava phone.
- Step 2: Press the “Volume down” and “Power key” buttons simultaneously for a few seconds.
- Step 3: Press the “Volume Up” and “Power” buttons for a few additional seconds once the screen darkens.
- Step 4: Release all buttons and keys if you did step 3 correctly. Once you release all buttons, you’ll see a dark screen with options.
- Step 5: Choose “Wipe data/factory reset” from the menu, using “Volume Up” to scroll up, “Volume Down” to scroll down, and “Power” to select.
- Step 6: From the Android Recovery screen, select the “Yes” option by pressing the “Volume Down” button and the “Power” key.
- Step 7: With the “Power” key, select “Reboot system now” from the next display.
Your Lava is now password, pattern lock, screen lock, and PIN-free after a hard reset.
Method 3. Unlock With Answer Security Questions
You can reset the Lava pattern lock using Google security questions without losing data.
Follow the steps below on how to unlock the Lava phone pin code:
- Step 1: Power on your Nokia.
- Step 2: Press “Forgot pattern” several times until you see “Forgot password”.
- Step 3: Click on “Forgot pattern” to access the unlock screen.
- Step 4: Enter your Google account details or answer questions to unlock the screen. Select “Answer question”.
- Step 5: Enter your exact security answers and tap the “Unlock” button.
- Step 6: Choose “YES” from the “YES” or “NO” menu, and the password field will appear.
- Step 7: Change your password or PIN.
- Step 8: You will see your Lava unlocked soon.
Method 4. Unlock the Keypad With a Security Code
You could reset your Lava lock screen phone using the default security code, even if you haven’t set any security code. Here’s how to quickly unlock the Lava lock screen security code.
- Step 1: Shut down your device.
- Step 2: Press these buttons in the following sequence on a classic phone.
Call button (green button) + Asterisk key (*) + Three (3)
- Step 3: Your screen displays a Formatting message when you press these keys.
- Step 4: Wait for the formatting to complete before releasing the keys.
o 12345.
Conclusion
If you have a classic-style keypad phone or an Android device, unlocking a locked Lava phone keypad is not easy. However, we believe that every problem has a solution. You can unlock Lava Android phones using any of the methods listed above.
Tips: Wondershare Dr.Fone is a tool that helps you keep your important data safe. It can back up all the important information on your Lava phone, like photos, music, videos, contacts, and more and is compatible with over 8000 Android devices. The backup process is easy and only takes a few clicks. You can also restore your backup to any device you want, and choose which data you want to restore. This is a great way to make sure you never lose your important Lava data!
How to Unlock Lava Agni 2 5G Bootloader Easily
Do you want to unleash the true power of your smart phone? Do you wish to have complete control over your smart phone? If yes, well, here is the answer; unlock bootloader. For people who are already into the tricks of hacking and rooting smart phones, might be aware of this. But still, there are exciting new developments. Bootloader is a code existing in all operating systems which usually comes pre-locked. So, it is important, if you wish to have a custom ROM installed on the Lava Agni 2 5G device, or if you wish to have other controls like installing applications which are incompatible, to have the Lava Agni 2 5G device bootloader unlocked. But going through with the process of unlocking bootloader and rooting the Lava Agni 2 5G device will not help and rather might break the warranty of the Lava Agni 2 5G device. This definitely calls for a diligent watch on how to unlock HTC bootloader. So, it is imperative as a user to know the process of HTC bootloader unlock. This article serves you with some ways you could follow to unleash the true power of your HTC device. Here’s how you can do it.
Part 1: Why We Want to Unlock HTC Bootloader
For people with HTC device, unlocking bootloader would mean complete authority over the smart phone and you have all the power to control the HTC device by all means. Since, bootloader usually comes pre-locked, unlocking the bootloader is the initial step if you would like to have a custom ROM installed in your device. There are various advantages of HTC unlock starting from gaining rights of control to installing latest custom ROMs in the phone and installing incompatible applications. Moreover, HTC unlock bootloader could boost the Lava Agni 2 5G device speed and battery life and also help in making complete backups of the Lava Agni 2 5G device. You could also have controls to remove bloatware from the HTC device. So, all in all, while there could be certain side effects, if not done properly, there are various advantages of unlocking HTC bootloader. If the process is carried out properly, the Android device could be the perfect smart phone you would like to have.
Part 2: How to Unlock Lava Agni 2 5G Bootloader
Lava Agni 2 5G is the flagship device of HTC by all means. With a world of features and offerings, Lava Agni 2 5G truly is a beast. While the phone is very powerful without any modifications, the true potential is yet to be seen and that can only be done if the bootloader is unlocked. So, to have a complete control over the Lava Agni 2 5G device, it is important to unlock the bootloader and the process has to be carried out diligently. One of the initial things that needs to be ensured is that the Lava Agni 2 5G device is fully charged or atleast 80% mark. Make sure you have the fastboot drivers for the Lava Agni 2 5G device configured on the windows machine and the Android SDK. Here are some of the steps which can be followed to unlock bootloader.
Step 1: It is always very important to keep the phone data backed up and more so when you are planning to unlock the bootloader.
As one of the initial measures, backup the Lava Agni 2 5G device completely as bootloader unlocking process will wipe all the data off. So, backup all the data like photos, contacts, multimedia files, documents, etc.
Step 2: Go to htcdev.com/bootloader. Ensure that you are registered with HTC and once the sign up is done, log in to HTC dev.
Now, ensure that HTC Sync Manager is installed on the PC.
Step 3: From the bootloader page, select your device using the drop down option as shown in the picture below.
After selecting the Lava Agni 2 5G device, click on “Begin Unlock Bootloader”, and then confirm all the dialogue boxes which come your way on screen.
Step 4: Now, you will be presented with four steps to put the Lava Agni 2 5G device in bootloader mode. Disconnect the Lava Agni 2 5G device from the PC and turn the Lava Agni 2 5G device off completely. Press the volume down button along with the power button to switch the Lava Agni 2 5G device on in bootloader mode.
Step 5: Use the volume keys of the Lava Agni 2 5G device to select Fastboot option along with pressing power button to confirm, after the Lava Agni 2 5G device is in bootloader mode. Now, connect the Lava Agni 2 5G device to the computer using a USB cable.
Step 6: Go to Fastboot folder on the PC and holding down the shift key, click on any empty space followed by a click on “Open command window here”.
Step 7: In the command prompt window, type “fastboot devices” and press enter. Lava Agni 2 5G will show up in the command prompt.
Note: The drivers have to be installed correctly to see the Lava Agni 2 5G device in the command prompt. So, if the Lava Agni 2 5G device does not show up, reinstall HTC Sync Manager and try again after restarting the computer.
Step 8: On HTC Dev’s website third page, click on “proceed to Step 9”. Follow the steps listed and then click on submit. The unlock token code for the Lava Agni 2 5G device will be mailed by HTC. Download the token and name it “Unlock_code.bin” and place the token in the fastboot folder.
Step 9: Now, in the command prompt window, type the following:
fastboot flash unlocktoken Unlock_code.bin
Step 10: On the Lava Agni 2 5G , one message will appear asking if you want to unlock the Lava Agni 2 5G device bootloader.
Use volume keys to select and power button to confirm. Once this is done, the Lava Agni 2 5G device will restart once and it’s done. The device is now bootloader unlocked.
- Title: The Ultimate Guide How to Bypass Swipe Screen to Unlock on Lava Agni 2 5G Device
- Author: Peter
- Created at : 2024-08-17 00:36:43
- Updated at : 2024-08-18 00:36:43
- Link: https://android-unlock.techidaily.com/the-ultimate-guide-how-to-bypass-swipe-screen-to-unlock-on-lava-agni-2-5g-device-by-drfone-android/
- License: This work is licensed under CC BY-NC-SA 4.0.