Unlocking the Power of Smart Lock: A Beginner’s Guide for Lenovo ThinkPhone Users

Google constantly comes up with features to simplify the way users interact and complete tasks on the Android platform. One of the most important features that techies loved to debate about was the Smart Lock Android, a secure password manager functioning in sync with a Google account on the Android phone.

Part 1: What is Android Smart Lock?

Android Lollipop added a feature called Smart Lock, and the feature was devised as a smart tool to prevent the Android phone from locking once it was initially unlocked. In other words, the feature overrides an Android phone’s Lock Screen feature, thereby saving users the need to enter passwords every time the Lenovo ThinkPhone device locks.

If you’re at home, it’s likely your android phone is locked out if you haven’t accessed at for some time. Smart Locks solves the problem in many ways. It allows you to allocate trusted places. Once you within range of the trusted places, your phone won’t lock. Trusted devices come next. Smart Lock is assigned to Bluetooth and Android NFC unlock devices.

Finally, trusted face unlocking is the ultimate face recognition system that unlocks your Android device as soon as you look at it across the front-facing camera. A face unlock first introduced with Android Jelly Bean and has been significantly improved in later versions.

Turning On Smart Lock

The feature is enabled by first accessing settings. For example, in a Samsung Galaxy S6:

Tap on Settings, which is the gear symbol.

• • Click on Personal and tap on Security.
• • Go to Advanced and tap on Trust agents and make sure Smart Lock is turned on.

• • Under Screen Security tap Smart Lock.
• • Here, you need to enter your Screen Lock. If you haven’t done so, set up a password and PIN by following the on-screen prompts. The screen Lock is needed every time you have to change the Smart Lock settings.

Within Smart Lock, there are three options for setting the system. You can set up trusted devices, trusted face, and trusted places individually, combining two or all three at the same time. You can choose just one trusted face, but you have the option to set up as many trusted devices and trusted places as needed.

Part 2: Turn On Smart Lock For Android with Trusted Devices

You can decide on a trusted device to be paired with Smart Lock Android.

For example, you can set up a Smart Lock for Bluetooth in your Android Bluetooth settings. It can also be done for Android NFC unlock devices. Examples include the Bluetooth system in your car, NFC unlocks, android sticker on the car’s phone dock, or Bluetooth in your watch.

• • Go to Settings.
• • Tap on Security and then Smart Lock.
• • Existing paired options are listed under Trusted Devices.
• • Initially, trusted devices will show None.

Tap on Add Trusted Devices.

The next screen is the Choose Device Type.

Since you have already paired Bluetooth, it will ask you to choose the Lenovo ThinkPhone device from the list.

• • As an example, let’s take the case of LG HBS800. It may show Not connected until you add it.
• • It will show up under Trusted devices in the Smart Lock menu.
• • When you turn the added device on, Smart Lock now unlocks the Android mobile.

Similarly, other Bluetooth and NFC unlock android supported gadgets can be added under the list of Trusted Devices.

Part 3: Turn On Smart Lock For Android With Trusted Locations

You can also add locations or addresses to Smart Lock Trusted Locations, and the phone unlocks automatically as soon as you arrive at the desired location. For example, you can set up your home or work address under Trusted Locations.

Check current settings first.

On a new Android phone, visit Settings>Personal.

Then Lock Screen and Security.

Then Secure Lock Settings.

Tap Smart Lock.

Tap on Trusted Places.

Tap on Add Trusted Places

• • Initiate the Google Maps app on the Android phone. Make sure the Internet and GPS are on.
• • Pick a place.

• • Click on Settings.
• • Click on Edit home or work. You can now add or edit the required addresses.
• • As an example, click on the Enter work address.
• • You now have the option to type in the address or use the address listed on Google Maps as the required work address.

• • A successful addition is listed and can be edited under the Edit work address.
• • Close the Google Maps app.
• • The work address is automatically propagated and configured with Smart Lock settings.
• • Go back to Settings> Security> Smart Lock> Trusted Places.
• • The work address you added is now listed under Work.

• • However, it is not yet configured as a Smart Lock option. Tap the location once, and it is enabled.
• • The switch along the address to the right turns blue, indicating it is enabled.
• • The work address is now listed under Trusted places for Work.

• • The phone is now configured for the work address and will unlock whenever you are at the location.
• • Since it works on Google Maps, the feature works through an Internet connection.

Part 4: Turn On Smart Lock For Android With Trusted Face

The feature recognizes your face and then unlocks the Lenovo ThinkPhone device. Once you set up the Lenovo ThinkPhone device to recognize your face as a trusted face, it will unlock the Lenovo ThinkPhone device as soon as it recognizes you.

PRECAUTION:  At best, this can be the first level of security, as one who resembles you to some extent can unlock the Lenovo ThinkPhone device. Photographs are not stored in the system. The device does hold necessary data to recognize your face, and the security level is determined by how good the Lenovo ThinkPhone device is configured. The data is not accessed by any app or loaded onto a Google server for backup.

Setting Up Trusted Face

• • Go to Smart Lock and tap Trusted Face.
• • Tap on Setup. Follow on-screen instructions.

The device begins to gather data about your face. The trusted face icon appears. As a backup, in case Smart Lock does not recognize your face, use the manual system by applying the PIN or password to unlock the Lenovo ThinkPhone device.

In case Trusted Face is not required, tap on reset Trusted Face appearing under the Trusted Face menu. Tap on Reset to reset the option.

How To Improve Facial Recognition In Your Bluetooth and Android NFC Unlock Devices

• • If you feel facial recognition is not up to the mark, go to Smart Lock and tap on a Trusted face.
• • Tap on Improve face matching.
• • Tap on Next and follow instructions on the screen to complete the task.

Smart Lock Android is a great feature and is only going to improve on time. With added security measures being introduced by Google for Bluetooth and NFC unlock android devices, including configuration to Google maps and Gmail, the feature may be one of the most important features to overcome constant blocking of devices even in protected places.

Video on How to Remove Android Lock Screen Without Data Loss

How to Reset a Lenovo ThinkPhone Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Lenovo ThinkPhone phone that is locked, or how to get into a locked Lenovo ThinkPhone phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Lenovo ThinkPhone Phone that is locked?

Before you go to reset your locked Lenovo ThinkPhone phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Lenovo ThinkPhone phone typically involves performing a factory reset. The process erases all data and settings on the Lenovo ThinkPhone device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Lenovo ThinkPhone , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Lenovo ThinkPhone Phone That is Locked With Google Find My Device?

Resetting a locked Lenovo ThinkPhone phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Lenovo ThinkPhone phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Lenovo ThinkPhone phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Lenovo ThinkPhone phone that is locked without a password?

In order to reset your Lenovo ThinkPhone phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Lenovo ThinkPhone phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Lenovo ThinkPhone Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Lenovo ThinkPhone devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Lenovo ThinkPhone phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Lenovo ThinkPhone .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Lenovo ThinkPhone device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Lenovo ThinkPhone Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Lenovo ThinkPhone phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Lenovo ThinkPhone phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Lenovo ThinkPhone Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Lenovo ThinkPhone device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Lenovo ThinkPhone phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Lenovo ThinkPhone phone with Gmail ID and password

It is imperative to understand that unlocking your Lenovo ThinkPhone Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Lenovo ThinkPhone phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Lenovo ThinkPhone device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Lenovo ThinkPhone. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Lenovo ThinkPhone phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Lenovo ThinkPhone phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Rootjunky APK To Bypass Google FRP Lock For Lenovo ThinkPhone

Factory Reset Protection (FRP) is a security feature built into Android devices running Android 5.1 Lollipop and later versions. It prevents someone from using your phone after a factory data reset without Google account login credentials. The FRP makes it much less attractive for thieves to steal Android phones, knowing they will need help to access them.

FRP automatically activates when you add a Google account to your Android phone. It links the Lenovo ThinkPhone device to your account, making it the “trusted owner.” Once activated, FRP becomes embedded in the phone’s system.

While Google FRP is a valuable security feature, it’s vital to acknowledge that there are legitimate situations where bypassing it might be necessary. These instances include forgotten Google account credentials, buying a second-hand device, and device issues. In these cases, tools like RootJunky can help you bypass FRP Lock. We’ll explore how to use RootJunky APK later, but first, let’s define what it is and its role in FRP bypass.

The RootJunky APK is a free Android application also called RootJunky SDL or RootJunky FRP Bypass tool. This app’s primary function is to bypass the Google Account FRP lock on Samsung devices. Rootjunky uses the weaknesses in Android’s setup process to create a new user account or switch existing ones, letting you bypass the FRP and regain control of your phone.

You can complete this process using the app by connecting your phone to a computer through an OTG cable. RootJunky can be helpfu l if you’ve forgotten your Google account password or bought a second-hand phone locked to someone else’s account. However, only use it if you have legitimate reasons to bypass FRP lock, like accessing your device after forgetting your Google account details.

Downloading the RootJunky FRP bypass tool from unofficial sources can introduce malware risks, so stick to trusted sources like the official website. Additionally, when exploring RootJunky, it is vital to keep the following in mind:

• Not all Android devices are susceptible to the methods used by RootJunky. It is necessary to check compatibility with your specific device model and Android version.
• Using FRP bypass tools like RootJunkycan potentially compromise the security of your device. Be cautious and proceed if you fully understand the risks involved.
• Bypassing FRP may involve data loss.
• Download RootJunky FRP bypass APK from a reliable source to minimize the risk of malware or viruses. You can check the APK file from official websites or trusted forums.
• Google constantly updates its security measures, so these tools may not always work effectively.

Part 2: How To Use RootJunky To Bypass Google FRP?

Here are the general steps to use the FRP Bypass APK RootJunky app to bypass Google FRP lock. But remember that specific steps may vary depending on your device and Android version:

• Step 1: On your computer, download the Rootjunky RealTerm program from the official Rootjunky website.

• Step 2: On your phone, download the Rootjunky APK (com.rootjunky.frpbypass-1.0.apk) file from the official website or other reputable sites.

• Step 3: Go to Settings > Security and tap Install unknown apps. Then, enable unknown sources to allow installation of apps from outside the Play Store. Connect your device to a Wi-Fi network.

• Step 4: On your Android phone, open a file explorer app and install the downloaded RootJunky APK file.
• Step 5: Connect your smartphone to your computer using a USB cable.
• Step 6: Launch the Rootjunky RealTerm program on your computer. Under the Display tab, check the Half Duplex option.
• Step 7: On your computer, go to Device Manager > Modems. Locate your device’s port name (e.g., COM3).
• Step 8: On the RealTerm program, enter the correct port number under the Ports tab, then click Change.

• Step 9: Click Send to establish a connection. Enter the two commands:

• at + creg? \ r \ n

• atd1234; \ r \ n

• Step 10: Once connected, the Rootjunky APK on your phone will provide on-screen instructions to bypass FRP.

• Step 11: If prompted, perform a factory data reset of your device.

While RootJunky offers a free method for FRP bypass, it can be incompatible with your device’s brand, requiring technical knowledge, tedious, and potentially risky. If you are looking for a simpler, safer, and more user-friendly solution, Wondershare Dr.Fone might be a better fit for you. If you want to learn how to use this tool to bypass FRP lock with minimal technical expertise, then keep reading.

Part 3: Easier Tool Than RootJunky APK To Bypass Google FRP

Google FRP adds an extra layer of security after a device reset. However, regaining access to the smartphone can be challenging if you forget your Google account details, forget your lock screen, or just buy a used device. While methods like the FRP RootJunky app exist, using it can be complex or risky.

Consider exploring third-party options like Dr.Fone for a potentially easier and safer FRP bypass solution. Dr.Fone Screen Unlock tool helps remove the Android FRP lock without requiring a PIN or Google Account.

Why Use Dr.Fone - Screen Unlock?

Here are some of the key features of Dr.Fone - Screen Unlock:

• **User-friendly:**Fone boasts an intuitive interface, eliminating the need for technical expertise. Even beginners can navigate the process with ease.
• **Widespread Brand Compatibility:**Fone supports mainstream brands, such as Samsung, Xiaomi, Oppo, Redmi, Realme, and Vivo, catering to a broader user base.
• **Fast and Efficient:**Regain access to your device in minutes without wasting time on tedious procedures.

Step-by-step Guide to Removing FRP Lock With Dr.Fone - Screen Unlock

Ready to leave the hassle of using RootJunky and easily bypass the FRP lock? Download and install Dr.Fone on your computer, then follow these steps to learn how to bypass Google FRP on your device:

• Step 1: Launch Dr.Fone on your computer and connect it to your Android device. Choose Screen Unlock from the Toolbox in the main interface.

• Step 2: Choose Android as your device type. This will take you to the next screen, where you can select Remove Google FRP Lock to proceed.

• Step 3: Select your device’s brand from the list and click Start to continue.

Note:

The next steps may vary depending on the brand you selected.

• Step 4: Select the OS version of your device and click Start to continue.

• Step 5: Access the secret menu on your phone using the on-screen instructions, then click Next to proceed to the next step.

• Step 6: When your Samsung prompts you to activate USB debugging, tap Allow. Then, on your computer screen, click Authorized to confirm.

• Step 7: You will see the FRP lock being bypassed on your Android device on the next screen.

• Step 8: Click Done if the FRP lock removal was successful, otherwise, click Try Again to repeat the process.

That’s it! With Dr.Fone Screen Unlock, you can easily bypass Google FRP and regain access to your Android device, leaving the complexities of RootJunky behind.

Tips: Are you searching for a powerful FRP bypass tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Conclusion

Both RootJunky and Dr.Fone offer options for you to regain control of phones with Google FRP lock. FRP Bypass RootJunky tool excels with its free-to-use approach, perfect for tech-savvy users comfortable with APK installations. While requiring a paid subscription, Dr. Fone provides pre-rooted firmware installations and broader device compatibility, which is ideal for those seeking a more streamlined but supported experience.

The best choice boils down to your personal needs and budget. Remember, FRP bypass should only be utilized by rightful owners facing genuine lockouts. When used responsibly, these tools can help you access your phone after a factory reset even without your Google account credentials. Choose the tool that best fits your needs and proceed with caution. Use these tools responsibly and regain access to your device the right way.

Also read: