The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Samsung Galaxy S23+ Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Samsung Galaxy S23+ device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove four-screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Samsung Galaxy S23+ device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.

How to Bypass Android Lock Screen Using Emergency Call On Samsung Galaxy S23+?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Samsung lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Samsung Phone

All Samsung devices come with the “Find My Mobile” feature. To bypass the Samsung lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

• Step 1. First, set up your Samsung account and log in.
• Step 2. Click the “Lock My Screen” button.
• Step 3. Enter a new PIN in the first field
• Step 4. Click the “Lock” button at the bottom
• Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Samsung Password

To know how to unlock a Samsung phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

• Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
• Step 2. Log into your Google account that you used on your locked device.
• Step 3. Choose the Samsung Galaxy S23+ device you want to unlock in ADM interface
• Step 4. Click on the “Lock” option.
• Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
• Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
• Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
• Step 8. Go to lock screen settings on your device and disable the temporary password.

Method 3. Google Login (Supports Only Android 4.4 or Lower)

If your device is still running on Android 4.4 or lower, here’s how to bypass the Samsung lock screen fast.

• Step 1. Enter the wrong pattern for five times
• Step 2. Choose “Forgot Pattern”
• Step 3. Enter your Google account login or backup PIN
• Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Samsung lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Samsung Galaxy S23+ device is locked.

• Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Samsung device.
• Step 2. Insert the card on your device
• Step 3. Restart your device into recovery mode.
• Step 4. Flash the file on your card and restart the phone.
• Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Samsung lock screen.

• Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
• Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Samsung Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Samsung Galaxy S23+ device completely to start the process. But this method will delete all the precious data on the Samsung Galaxy S23+ device after the factory reset.

• Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
• Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
• Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
• Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
• Step 5. Select it by pressing the Power button.
• Step 6. Select “Reboot System Now” once the process is done.

Backup your Samsung phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Samsung lock screen. Specifically, you can boot your Samsung device into Android Safe Mode .

• Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
• Step 2. It will ask if you want to boot in safe mode. Tap “OK”
• Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
• Step 4. Uninstall the third-party lock screen or just reset the data.
• Step 5. Reboot your device and get out of safe mode.
• Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

• Step 1. Take your friend’s phone to call on your locked phone.
• Step 2. Accept the call and press the back button without disconnecting.
• Step 3. Now you can access the Samsung Galaxy S23+ device completely
• Step 4. Go to the security settings of the Samsung Galaxy S23+ device and remove the pattern or pin.
• Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Samsung lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

Mastering Lock Screen Settings: How to Enable and Disable on Samsung Galaxy S23+

In the modern world, the use of smartphones has become such a common trend that everyone would feel abnormal if they don’t have a smartphone of their own. So big the demand is that all IT companies are trying their best to introduce as well as innovate several excellent brands of smartphones. To support the function of smartphones, by far there have been numerous operating systems existed. Among them, Android is one of the most popular as well as trustworthy OS.

Just like any other smartphone, all Android devices have their ways to protect the data stored inside a smartphone from being corrupted or leaked. One of the simplest and most easy-to-use ways is to make use of the lock screen.

The lock screen has proved to be a traditional yet efficient way to help you protect your Android phones. In this article, we will provide you with an informative piece of writing about everything you need to know when it comes to the Android lock screen, and ways to enable and disable it.

If you have spent time searching and looking for features of your Android devices, you will find the process of enabling a lock screen is a piece of cake.

· Step 1: On the main screen of your Android devices, tap on the gear icon - which is the icon representing the Settings menu. Once you have chosen it, you will see a drop-down menu on the screen. In the options provided, tap on the Security bar.

· Step 2: Under the tab whose heading is entitled Screen Security, tap on the first bar in the list called Screen lock.

· Step 3: Once the step is done successfully, Android will give you plenty of choices about ways to lock your Android devices’ screens. Among these ways, select one particular type which you feel is most convenient as well as free-risk. After that, type in your PIN code to confirm the choice and finally activate your lock screen feature as you wish.

Part 2: How to Disable Android Lock Screen

To certain customers, the lock screen can do more harm than good, and they would prefer to disable the screen lock on their Android devices. This process is also an easy one to follow, as long as you still hold good memory of the security code.

· Step 1: On the main screen of your Android devices, tap on the gear icon. It will directly lead you to the Settings menu of the phone. After that, a drop-down menu will appear with several choices and bars. Among them, tap on the Security option to begin your work.

· Step 2: Under the heading called Screen Security heading, you will be shown 3 choices. Tap on the first one, which is entitled Screen lock.

· Step 3: Once you have done the previous step, a brand new screen will appear and then you will be asked to fill in your PIN code. This is a step that helps guarantee that you are the true owner of the Android device.

Step 4: As soon as you have confirmed the right PIN code in the bar provided, you will then be presented to the next drop-down menu. A similar screen will appear which shows you plenty of choices. Tap on the top of that list, which is a bar called None.

Step 5: In the end, you have successfully disabled the screen lock on your Android devices. You are now capable of using it without any hesitation about the screen lock.

Part 3: Common Problems of Disabling Lock Screen

The process to disable the screen lock on Android may seem easy to handle as well as straightforward to several customers, but there are still some annoying problems that users have to deal with while trying to disable the lock screen.

What are the top 2 common problems?

Below are the two most common problems faced by Android users during their efforts to disable the feature of screen lock.

1. In the Screen Security choice, the None bar can not be chosen.

Description of the problem: There is a sentence below it stated: “Disabled by administrators, encryption policy or credential storage”. All the space of the None option is in white and grey.

The solution to this problem is quite simple. Once you have made sure you are suffering from this nasty one, try to follow these below pieces of advice to see if it is capable of giving you a hand.

Step 1: Open the Settings menu from the main screen. Then tap on the Credential Storage. You will see a drop-down menu like the screenshot below.

Step 2: Continue to tap on the Clear Credentials (Remove all certificates) option. Then next click on the OK button. Wait for some seconds until your Android device has finished the process.

Step 3: To make sure that the previous step has been performed successfully, try looking at the bottom of the drop-down menu. If the Clear Credentials (Remove all certificates) are grey out and can not be selected, then you have managed to do it.

Step 4: Now that the problem is solved, you can feel free to turn back to your Screen lock option in the beginning and disable the feature of locking screen Android as usual.

2. You have mistakenly encrypted your SD card. You want to disable the encryption, only to realize that it requires you to set a new screen lock code. But when you come to the Screen lock menu, all the options but Password have been greyed out.

This is pretty weird, but actually, it is one of the most common troubles that many users have complained about. But to your surprise, the solution is very simple and easy. All you have to do is to reset your password, but with a little change. Your password MUST include at least ONE NUMBER in it. Confirm your new password then you will be able to disable the lock screen Android as usual.

Bonus Tip: Remove Android Screen Lock If Forgotten Password/Pattern

As much as the lock screen can protect the personal information on the phone, it can also cause much trouble if you forget the lock screen password or enter the wrong password too many times. So here comes the need for phone unlocking software . One of the best is Dr.Fone - Screen Unlock (Android), which can help us bypass forgotten Android screen locks without any data loss（limited to Samsung and LG series phones）. Other Android brand phones will be wiped out all the data once starting to unlock with Dr.Fone

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• One-time payment for unlimited use of multiple devices within a specified time period.
• Work for Samsung Galaxy S/Note/Tab series, LG G2/G3/G4, etc.
• Besides, unlocking the screen lock, it also works best to unlock the Samsung FRP lock in devices with Android 5.0 and higher.

3981454 people have downloaded it

Steps on How to Unlock Forgotten Password in Android Phones

Step 1: Launch Dr.Fone and click on Screen Unlock from the primary window.

Step 2: Connect your Android device to the computer via USB cable. The program will recognize the phone directly. Select the phone model or “I can’t find my device model from the list above” to continue.

Step 3: Follow the instruction on the program exactly to set the phone to Download Mode. First, you will need to Power off your Phone. Secondly, Press on Volume Down, Home button, and Power button simultaneously. Thirdly press the Volume up button to navigate until the phone enters Download mode.

Step 4: After you set the phone to Download mode, it will begin to download the recovery package. When the recovery package is downloaded successfully, the lock screen on your Samsung Galaxy S23+ devicewill be removed. You won’t lose any data during the whole process.

Also read: