How to Unlock Samsung Galaxy XCover 6 Pro Tactical Edition Phone without Google Account?

Uh oh – you’ve forgotten your Android Unlock code, and you can’t get it online to unlock using Google. Nothing could be more frustrating than gazing at your phone, knowing that it is essentially a paperweight at this point. Unless you can get it unlocked, your phone is useless, and all of your important photos, text messages, and content are all locked out of your reach. While right now, nothing can do without a Google account. But you can try to reset your Google account first.

Part 1: How to Bypass Lock Screen on Android device with Google Account (Android Device Manager)

Even if you have a Google account, if your phone isn’t connected to the internet, you cannot access it to unlock your phone. If this sounds familiar, you can always try this method.

1. First, navigate to the Android Device Manager page. You will need to sign in with the Google account that you use to set up your phone.

Android Device Manager link: http://www.google.com/android/devicemanager

2. Once you have logged in, you will automatically be redirected to the Android Device Manager page. If this is your first time, click the “Accept” button.

3. A list of all of the Samsung Galaxy XCover 6 Pro Tactical Edition devices registered to this Android account will pop up. Select the Samsung Galaxy XCover 6 Pro Tactical Edition device in question from this list.

4. The Android Device Manager will then locate your device. Make sure it is turned on!

5. After it has been located, you will have a few options for what to do next. If you do not know your phone’s location, you can call it from this screen, but if you know where it is, click the ‘Enable Lock & Erase’ option.

6. A notification will pop up on your device; confirm it.

7. At this point, you will be asked to create a new lock screen password. Once you have chosen one, press “Lock.”

8. Now, simply enter the new passcode on your device, and voila! It will open, and you can get back to your daily routine.

Part 2: How to Reset Your Google Account on your Android Phone

If you have forgotten your Google Account password, it is still possible to unlock your account and access the information within. Here is how you can unlock your Google account on your Android phone.

1. On your browser, go to the Google home page and try to sign in. You will fail, but that is good! It will lead you to the next step.


2. Since you cannot sign in on the sign-in page, you can now select the ‘Help’ link.

3. Choose the “forgot password” option. You will be prompted to enter your email address to proceed.

4. Two options will then appear: the first is your phone number, and the other asks you for your backup email.

5. Enter either one of these options, and you will receive a verification code via email, SMS, or a telephone call from an operator. If you have chosen to enter your backup email, at this point, you will receive detailed instructions on how to access the ‘reset password’ page.

6. Once you have been redirected to the ‘reset password’ page, you can input your new login information.

7. Finally, you can unlock your Google account on your Android! Confirm this by clicking the “Change Password” button. Success!

Part 3. How to Remove Locked Screen on Android using Dr.Fone

It supports removing screen lock from mainstream models, such as Samsung, LG, Lenovo, Xiaomi, etc. For some older version Samsung models, you can remove the lock without data loss. It will erase data after unlocking for other models.

Dr.Fone - Android Lock Screen Removal

Remove Android Screen Lock In One Click

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• No tech knowledge asked. Everybody can handle it.
• It will complete the unlocking process in minutes.

3,981,454 people have downloaded it

How to use Dr.Fone to unlock

Step 1: Install Dr.Fone toolkit and select Screen Unlock > Android > Unlock Android Screen.

Now connect your Android phone connected with the PC, and select the Samsung Galaxy XCover 6 Pro Tactical Edition device brand from the list.

Step 2: Follow the on-screen instructions to put your Android device into the specific mode. Once the download is complete, Dr.Fone will start the unlocking process.

Step 3: After the process is complete, your Android device should be unlocked, and you can access it without the screen lock.

Conclusion

We know that losing or forgetting your Android lock code can be a real pain, and so these solutions are sure to put the smile back on your face and get you using your phone again as usual. As you can see, the Dr.Fone - Screen Unlock (Android) is a simple and reliable way to unlock your Android phone, but you can always try the Google option if you assess that it better suits your needs. No matter which solution you choose, your locked Android phone will be up and running again in no time at all.

How to Unlock Samsung Galaxy XCover 6 Pro Tactical Edition Bootloader Easily

Do you want to unleash the true power of your smart phone? Do you wish to have complete control over your smart phone? If yes, well, here is the answer; unlock bootloader. For people who are already into the tricks of hacking and rooting smart phones, might be aware of this. But still, there are exciting new developments. Bootloader is a code existing in all operating systems which usually comes pre-locked. So, it is important, if you wish to have a custom ROM installed on the Samsung Galaxy XCover 6 Pro Tactical Edition device, or if you wish to have other controls like installing applications which are incompatible, to have the Samsung Galaxy XCover 6 Pro Tactical Edition device bootloader unlocked. But going through with the process of unlocking bootloader and rooting the Samsung Galaxy XCover 6 Pro Tactical Edition device will not help and rather might break the warranty of the Samsung Galaxy XCover 6 Pro Tactical Edition device. This definitely calls for a diligent watch on how to unlock HTC bootloader. So, it is imperative as a user to know the process of HTC bootloader unlock. This article serves you with some ways you could follow to unleash the true power of your HTC device. Here’s how you can do it.

Part 1: Why We Want to Unlock HTC Bootloader

For people with HTC device, unlocking bootloader would mean complete authority over the smart phone and you have all the power to control the HTC device by all means. Since, bootloader usually comes pre-locked, unlocking the bootloader is the initial step if you would like to have a custom ROM installed in your device. There are various advantages of HTC unlock starting from gaining rights of control to installing latest custom ROMs in the phone and installing incompatible applications. Moreover, HTC unlock bootloader could boost the Samsung Galaxy XCover 6 Pro Tactical Edition device speed and battery life and also help in making complete backups of the Samsung Galaxy XCover 6 Pro Tactical Edition device. You could also have controls to remove bloatware from the HTC device. So, all in all, while there could be certain side effects, if not done properly, there are various advantages of unlocking HTC bootloader. If the process is carried out properly, the Android device could be the perfect smart phone you would like to have.

Part 2: How to Unlock Samsung Galaxy XCover 6 Pro Tactical Edition Bootloader

Samsung Galaxy XCover 6 Pro Tactical Edition is the flagship device of HTC by all means. With a world of features and offerings, Samsung Galaxy XCover 6 Pro Tactical Edition truly is a beast. While the phone is very powerful without any modifications, the true potential is yet to be seen and that can only be done if the bootloader is unlocked. So, to have a complete control over the Samsung Galaxy XCover 6 Pro Tactical Edition device, it is important to unlock the bootloader and the process has to be carried out diligently. One of the initial things that needs to be ensured is that the Samsung Galaxy XCover 6 Pro Tactical Edition device is fully charged or atleast 80% mark. Make sure you have the fastboot drivers for the Samsung Galaxy XCover 6 Pro Tactical Edition device configured on the windows machine and the Android SDK. Here are some of the steps which can be followed to unlock bootloader.

Step 1: It is always very important to keep the phone data backed up and more so when you are planning to unlock the bootloader.

As one of the initial measures, backup the Samsung Galaxy XCover 6 Pro Tactical Edition device completely as bootloader unlocking process will wipe all the data off. So, backup all the data like photos, contacts, multimedia files, documents, etc.

Step 2: Go to htcdev.com/bootloader. Ensure that you are registered with HTC and once the sign up is done, log in to HTC dev.

Now, ensure that HTC Sync Manager is installed on the PC.

Step 3: From the bootloader page, select your device using the drop down option as shown in the picture below.

After selecting the Samsung Galaxy XCover 6 Pro Tactical Edition device, click on “Begin Unlock Bootloader”, and then confirm all the dialogue boxes which come your way on screen.

Step 4: Now, you will be presented with four steps to put the Samsung Galaxy XCover 6 Pro Tactical Edition device in bootloader mode. Disconnect the Samsung Galaxy XCover 6 Pro Tactical Edition device from the PC and turn the Samsung Galaxy XCover 6 Pro Tactical Edition device off completely. Press the volume down button along with the power button to switch the Samsung Galaxy XCover 6 Pro Tactical Edition device on in bootloader mode.

Step 5: Use the volume keys of the Samsung Galaxy XCover 6 Pro Tactical Edition device to select Fastboot option along with pressing power button to confirm, after the Samsung Galaxy XCover 6 Pro Tactical Edition device is in bootloader mode. Now, connect the Samsung Galaxy XCover 6 Pro Tactical Edition device to the computer using a USB cable.

Step 6: Go to Fastboot folder on the PC and holding down the shift key, click on any empty space followed by a click on “Open command window here”.

Step 7: In the command prompt window, type “fastboot devices” and press enter. Samsung Galaxy XCover 6 Pro Tactical Edition will show up in the command prompt.

Note: The drivers have to be installed correctly to see the Samsung Galaxy XCover 6 Pro Tactical Edition device in the command prompt. So, if the Samsung Galaxy XCover 6 Pro Tactical Edition device does not show up, reinstall HTC Sync Manager and try again after restarting the computer.

Step 8: On HTC Dev’s website third page, click on “proceed to Step 9”. Follow the steps listed and then click on submit. The unlock token code for the Samsung Galaxy XCover 6 Pro Tactical Edition device will be mailed by HTC. Download the token and name it “Unlock_code.bin” and place the token in the fastboot folder.

Step 9: Now, in the command prompt window, type the following:

fastboot flash unlocktoken Unlock_code.bin

Step 10: On the Samsung Galaxy XCover 6 Pro Tactical Edition , one message will appear asking if you want to unlock the Samsung Galaxy XCover 6 Pro Tactical Edition device bootloader.

Use volume keys to select and power button to confirm. Once this is done, the Samsung Galaxy XCover 6 Pro Tactical Edition device will restart once and it’s done. The device is now bootloader unlocked.

How to Show Wi-Fi Password on Samsung Galaxy XCover 6 Pro Tactical Edition

Since the invention of Android OS in 2008 by Andy Rubin, our world has faced a dramatic change. Android seems to be controlling a considerably high portion of our life. We have bought many gadgets that use this amazing OS and most of which are phones. But how much can you do with your Android phone? Developers are always making it more interesting to use this interface.

Most of the time, we use Android phones, we get faced with the need to access the internet. The Wi-Fi capability of these Android gadgets makes it super easy for us to surf the web. Throughout using Wi-Fi, we connect to a number of them. This could be at school, a sub-way café, the gym, buses, hospitals, hotels, towns, and the list is endless. A password secures most of this. Needless to say, our brain is weak to store all these passwords for future use, especially if you would want to connect with a different gadget you have recently bought or even your laptop. In this article, we will introduce you to how to find wifi password on rooted and also unrooted Android devices.

Part 1: Show Wifi Password on Rooted Android Device

What is Rooting?

First of all, what does rooting mean? You have probably used a Windows computer or even Linux. For the case of Windows, when installing a new program or software, it always prompts a dialog box saying, “Administrator permission required to run this program.” If you don’t have the administrator permission, you won’t install the program. In Android, this is called rooting. In simple terms, it means having the root permission to your phone. Some Android apps will require you the root permission, e.g., flashing your ROM. In this part, we will explain how you can show the Wi-Fi password on your Android with root.

To find the Wi-Fi passwords on your Android phone, you need to have an app to explore files which also supports a root user. In this case, ES FileExplorer or Root Explorer will come in handy. However, it turns out that the latter is offered at $3. Let’s use the free ES File Explorer.

Steps of getting Wi-Fi password on Android with root

In only four steps, we, at this moment, learn how we can find the password of a Wi-Fi on an Android phone.

Step 1: Install the ES File Explorer

Download the ES File Explorer from your play store, install it, and open it.

Step 2: Enable Root Explorer

The root explorer needs to be enabled so that you can reach the root folders of the Wi-Fi passwords you need. By default, the root feature in this ES explorer is not enabled. To enable it, just tap on the list menu on the top left corner.:

This will drop down a list of controls. Scroll down and find the Root Explorer option and enable it.

Step 3: Get the passwords’ file.

Go back to ES file explorer, and this time, find the folder named data.

When this folder opens, find another one named misc. Open it and find another one named wifi. Here, find a file named wpa_supplicant.conf.

Step 4: Retrieve the wifi password on Android

Make sure that you don’t edit anything in the file. You might mess up with important data and fail to access the Wi-Fi(s) in the future.

As you can see above, we have found the Wi-Fi passwords on the android device. On each network profile, we have the name of the network represented by name (ssid=”{the name}”), the network’s password represented by psk, the network’s access point represented by key_mgmt=WPA-PSK and its priority represented by priority.

Part 2: Show Wifi Password on Android without Root

What if I don’t have root access to my Android, can I still see Android Wi-Fi password? The short answer is yes. However, this is a bit involving but simple. You don’t need to be a computer guru to do it, but you need to have a computer and some internet access of course. The key thing is to find a way through which we can fetch the password file from the phone without using a root access protocol in the Android. This is made possible by some little programming insight using the Windows Command prompt.

Steps to show Wi-Fi password on Android without root

Step 1: Access the Developer authority

To access the files that Android uses to run passwords, you must first become a developer. This is very simple.

Get your Android phone and go to settings. Scroll down and find “About phone.” Tap on it and scroll down again to find Build number.

Tap on this “build number” 5 to 6 times until a message pops up, saying, “You are now a developer”.

Step 2: Enable the debugging.

Go back to Settings. Scroll down for developer options. Turn on the button for “Android/USB debugging”.

Step 3: Install ADB drivers.

Now, open your Windows desktop. Download and install ADB drivers. (Use this download link adbdriver.com ). You need to download and install platform tools (minimal ADB and fastboot) from http://forum.xda-developers.com/... Now open the folder where you’ve installed the above tools. By default, it is in the Local disc C\windows\system32\platform_tools location. However, you might want to locate them by searching on the windows search engine. You have to hold the Shift key and right-click inside the folder to click on”Open Command Window Here.”

Step 4: Test the ADB

Here, we would like to test whether the ABD is working properly. To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it’s working properly, you should see a device on this list.

Step 5: Find the Android wifi password.

Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords.

Lastly, open the file with a notepad, and there you go.

Now you learned how to show the wifi password on your Android device.