How to Unlock Samsung Galaxy S23 Tactical Edition Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

• 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
• Support 20,000+ mainstream models of Android phones & tablets.
• Save you from ending up with a locked phone after too many wrong attempts.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Samsung Galaxy S23 Tactical Edition device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

• Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
• Step 2. Then you would need to insert the SD card into your locked phone and then restart the Samsung Galaxy S23 Tactical Edition device in recovery mode.
• Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Samsung Galaxy S23 Tactical Edition device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

How To Unlock Samsung Galaxy S23 Tactical Edition Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Samsung Galaxy S23 Tactical Edition device, then do the following:

• The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
• “Forgot pattern” will show up at the bottom of the screen.

• You must enter the Gmail account that is associated with the Samsung Galaxy S23 Tactical Edition device here before selecting “Next.”

• That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Samsung Galaxy S23 Tactical Edition device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Samsung Galaxy S23 Tactical Edition device’s associated Google account and then follow these steps:

• On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
• After choosing the Samsung Galaxy S23 Tactical Edition device, select one of the three options, “lock,” from the list.
• There will be a new pop-up window that you can use to change the Samsung Galaxy S23 Tactical Edition device password. Additionally, you can choose to add a phone number or recovery email.
• Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

• Sign in with your Samsung account at findmymobile.samsung.com.
• Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

• You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
• Launch the installer after that to begin downloading crucial software for your machine.

• Here, you must use a USB cable to connect your Samsung Galaxy S23 Tactical Edition to the computer
• This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
• After that, activate USB debugging by going to Settings > Developer Options.

• Launch the command prompt in the ADB installation directory after your device is connected to the system.
• Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

• Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Samsung Galaxy S23 Tactical Edition device. Here’s how to restore a locked phone to factory settings.

• Use the buttons to see the recovery menu.
• Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
• Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
• Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
• Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

• Click on Android pattern lock.
• You’ll see a notification telling you to try again in 30 seconds after failing many times.
• The “Backup PIN” option will be there; choose it.
• Put the backup PIN and OK here.
• At last, you may unlock your cellphone by entering the backup PIN.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ ### 6\. Boot into safe mode

Here’s how you can boot into safe mode.

• Hit the power button on your phone.
• Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
• “Safe mode” will be shown at the bottom of your screen.
• Out of safe mode
• Switch off your phone.
• Press the Power button on your phone for around 30 seconds, or until the Samsung Galaxy S23 Tactical Edition device restarts.
• You will see that after entering and booting into the safe mode, the lock option will not be visible.
• Then you will also see the option to turn off boot.
• You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

• Offset your phone.
• Hold down the Power, Home, and Volume Down keys all at once.
• Use the Volume Up button to start Download Mode.
• Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

Click here

### The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.

How to Unlock Samsung Galaxy S23 Tactical Edition Phone without Any Data Loss

In today’s digital age, our Android phones serve as the primary hub of our lives, holding a treasure trove of personal and professional data. Yet, the frustration of being locked out due to forgotten passwords or malfunctioning security features can be overwhelming, compounded by the fear of data loss during the recovery process. However, there’s a beacon of hope - a way to unlock your Android phone without any data loss. In this comprehensive guide, we will explore the latest techniques, tools, and methods to regain access to your Android device safely without a password, PIN, or fingerprint. Let’s dive into it now.

Part 1. How to Unlock Samsung Galaxy S23 Tactical Edition Phone with Dr.Fone - Screen Unlock (Android)

If you or someone accidentally forgot or mistyped/misentered your lock password and caused it to lock permanently, of course, you will find ways to unlock it at first. But if you are not connected to the internet, or did not register a Google account for your device, your last resort would be to factory reset your device. That will totally wipe everything you have and save it on your device. If you want to unlock your lock screen without having to worry that your device data will be erased, Dr.Fone - Screen Unlock (Android) is your phone unlocking software .

safe & secure

Note: This tool temporarily support unlocking part of Samsung and LG locked screen without losing data, but other Android phone will be wiped all data if you try to unlock the screen with Dr.Fone - Screen Unlock (Android).

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series and LG G2/G3/G4.

4,464,578 people have downloaded it

Steps on How to Unlock an Android Phone with Dr.Fone - Screen Unlock (Android)

Step 1. Connect your Android phone to your PC with Dr.Fone installed, then run the program.

Step 2. Then, you should see the “Screen Unlock” tool, so proceed into it. After that,  click “Android” > “Unlock Android Screen.”

Step 3. Then choose “Remove without Data loss” to unlock part Samsung/LG devices without data loss and find your device model.

Step 4. Follow the instructions on the program to get the Android phone into “Download Mode.”

• 1. Power off the phone.
• 2. Press and hold volume down + home button + power button at the same time.
• 3. Press the volume up to enter download mode.

Step 5. The loading process will take you a few minutes because it is going to verify first your device’s compatibility.

Step 6. Wait until everything is done. You should then see your device already has no lock screen.

That’s how to unlock an Android phone with just one click using Wondershare’s Dr.Fone. If your device is not Samsung or LG, you can use a more advanced mode to unlock your phone .

Part 2. How to Unlock Android Phone with Aroma File Manager (with Data Loss)/h2>

If you weren’t able to open your Wi-Fi or data connection or enable USB Debugging, this is the way for you to unlock your lock screen. This could be a bit complicated, but it should work.

Steps are provided below, and please follow the step-by-step guide carefully to avoid a boot loop or any other damage.

Step 1. Download Aroma File Manager on your PC. This is a tool that unlocks Android phones. Android users can use it for free.

Step 2. Go to your Downloads folders and copy the downloaded zip file.

Step 3. Plug into your PC a memory card that you can insert into your phone later. Then, go to your list of connected devices and select the memory card.

Step 4. Paste the copied Aroma zip file. Once copied, eject it from your PC, then insert it into your Android device.

Step 5. Enter Recovery Mode for your device. Each Android device has its own ways of entering recovery mode, so take a look at this link and find your device.

Step 6. When you are already in Android Recovery Mode, use your volume keys to navigate to ‘’apply update from external storage’’, then select the zip file you copied a while ago. It will be flashed on your device.

Step 7. After it, restart, and recovery mode will reopen as Aroma File Manager, so go to its settings and select ‘’Automount all devices on start’’, then restart. Back in Aroma File Manager, go to the directory data>system. Check if the ff. exist. If they do, delete them. Then restart again.

• gesture.key (pattern) / password.key (password)
• locksettings.db
• locksettings.db-shm
• locksettings.db-wal
• signature.key
• sparepassword.key

Now you have your device booted up, and your Android lock screen is still locked, just gesture in or enter anything. It will be unlocked. And that’s how to unlock an Android phone using your device.

Part 3. How to Unlock Android Phone Using Minimal ADB and Fastboot (with Data Loss)

If you weren’t able to connect to the Internet, but you, fortunately, enabled your USB Debugging option before your device was locked, the ARONSDB tool from the Android SDK package can help you unlock your Android phone.

Here is the step-by-step guide for you to follow

Step 1. Go to Minimal ADB and Fastboot download page.

Step 2. Download the tool’s latest version.

Step 3. Open the downloaded Minimal ADB and Fastbootzip file and install it.

Step 4. Make sure your device is connected, then go to the Minimal ADB and Fastboot installation directory.

This PC [Win 8& 10] or My computer [Windows 7 & below]> Local Disk (C:) [primary drive]> Program Files [for 32-bit] or Program Files (x86) [for 64-bit] > Minimal ADB and Fasboot.

Step 5. Inside the folder, hold the Shift key on your keyboard, then right-click your mouse. An additional “Open command window here” will appear so select that.

Step 6. ADB terminal will pop out. Now, the first is to type in ADB devices. This is to check if your device is recognized by ADB. If there is no device listed below, try to remove and reconnect your Samsung Galaxy S23 Tactical Edition and retype the command. If there are listed devices already, proceed.

Step 7. Finally, type in the following commands one by one. These commands will remove your lock screen.

• adb shell
• cd /data/data/com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where
• name=’lock_pattern_autolock’;
• update system set value=0 where
• name=’lockscreen.lockedoutpermanently’;
• .quit

This would work if you have your USB debugging turned on before it was locked. That’s how to unlock Android using ADB.

Part 4: How to Unlock Phone via Find My Device (with Data Loss)

Google Find My Device is another handy way to unlock your locked Android device. However, it requires you to have your Google ID credentials and you have previously enabled Find My Device features. Moreover, it will erase all the data on your device. Use the following steps to unlock your Android phone via Find My Device:

Step 1: Open a web browser on a computer or another device and visit the Find My Device website. Now, sign in with the Google account that is linked to the locked Android device.

Step 2: After signing in, you will see a list of devices associated with your Google account on the left side of the screen. Select the locked Android device from the list and choose the “Erase Device” option from the menu on the left-hand side.

Step 3: You will now be asked to confirm your identity through a Google account password or using a pass-key. Afterward, follow the on-screen instructions to erase and unlock your Android device.

Part 5: How to Unlock Android Phone without Losing Data in Safe Mode

One way to unlock your Android phone without losing the data is by utilizing Safe Mode. This method works only if the screen lock you have been using is a third-party app. Since Safe Mode disables third-party apps, you can easily use it to uninstall the problematic app. Here is how to unlock an Android phone without losing data:

Step 1: On your Android device, press and hold “Power” and “Volume Down” keys together for 3 seconds. After the Power menu becomes visible, press and hold the “Power off” option.

Step 2: After a while, you will see the “Safe Mode” option on your screen with some basic instructions. Now, you can use the button to boot into Safe Mode and remove the screen lock application.

Part 6. How to Unlock Android Phone without Any Data Loss Using Google Account (Android 4.4 or lower)

If luckily, you left your Wi-Fi open and luckily connected to the internet, this is the easiest way to unlock your Android phone.

The step-by-step guide for you to refer

Step 1: Retry the incorrect password or pattern until the ‘’Forgotten Password/Pattern’’ appears below. Then select that.

Step 2: Check ‘’Enter your Google Account details’’ then tap next.

Step 3: Input your Google Account details, username, and password. You are done.

You will be given the option to input a new password or pattern right after you enter your Google account details. But if not, Google must have emailed you your temporary password or pattern that you will input to unlock your lock screen.