How to Unlock Motorola Razr 40 Phone with Broken Screen

Seeing as the only way to control your Motorola Razr 40 deviceis the touch screen, a broken device can cause you a lot of worries. Most people think that there is no way to get their device to work again let alone be able to unlock it if the screen is broken or cracked . It is, however, important to find a way to unlock the broken device so that you can gain access to your data and create a backup to restore to a new device.

In this article, we are going to look at a few simple ways you can unlock an Android device with a broken screen.

Here is a video for you to learn how to unlock Android phone or access phone with broken screen:

Method 1: Using Android Debug Bridge (ADB)

For this method, you will need your device and access to a PC. It is the most powerful method to unlock a broken Android device. It will however only work if you have enabled USB debugging on your android phone. If you haven’t, skip this method and see if method 2 or 3 might be of help.

ADB creates a bridge between the PC and your device which can then be used to unlock the Motorola Razr 40 device. Here’s how to use this bridge.

Step 1: Download the Android SDK package on your PC. You can download it here: http://developer.android.com/sdk/index.html . Extract the ZIP file on your PC.

Step 2: Download the necessary drivers for your device. The USB drivers for your device can be found on the manufacturer’s website.

Step 3: Launch Command Prompt on your PC and change the location of the ADB file. Type in the following into Command Prompt; cd C:/android/platform-tools

Step 4: Connect the Motorola Razr 40 device to your PC using USB cables. Enter the command “ ADB _device_” (without quotation marks). If your phone is recognized, you will see numbers in the Command Prompt message.

Step 5: Type in the following two commands. You will need to type in the second one immediately after the first. Replace 1234 with your password.

ADB shell input text 1234
Shell input key event 66

Step 6: Your phone will now be unlocked and you can proceed to back up its contents.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Phones Without Android Factory Reset Codes

• It enables your Android phones to get safe, simple, and trustful after reset.
• It is still helpful even though you don’t know the OS version of your devices.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate.

4,008,670 people have downloaded it

Method 2: Using a USB Mouse and the On the Go Adapter

This is a great solution if you don’t have USB debugging enabled on your device. You will need your device, an OTG adapter and a USB mouse. It involves connecting the Motorola Razr 40 device to the USB mouse using the OTG adapter. Check if your device can be connected to a USB mouse. You can find an OTG adapter online, they are relatively inexpensive and very useful.

Before we begin, it is a good idea to ensure your device is sufficiently charged because the Mouse may drain your battery.

Step 1: Connect the Micro USB side of the OTG adapter to your device and then plug in the USB mouse to the adapter.

Step 2: As soon as the Motorola Razr 40 devices are connected, you will be able to see a pointer on your screen. You can then use the pointer to unlock the pattern or enter the Motorola Razr 40 device’s password lock.

You can then go about backing up the contents of your device.

Method 3: Using your Samsung Account

This method is a reliable way to unlock a Samsung device that has a broken screen or is not working correctly. While it is highly effective you will need to have a Samsung account registered with your device. The problem is that not many Samsung device users have registered their devices with the service. If you are among the lucky few who have, here’s how to use your account to unlock your device.

Step 1: Visit the https://findmymobile.samsung.com/login.do on your PC or any other device and log in with your account information.

Step 2: Select your device from the menu on the left-hand side of the screen.

Step 3: You should see the option “Unlock my screen” on the sidebar. Click on it and you will get instructions on how to access your device.

Conclusion

Being unable to unlock your device is never a good place to be. We hope one of the above solutions will work for you. You can then gain access to your device and back up the files and contacts. This way your life doesn’t have to be disrupted- you can just restore the backup on a new device or the old one once the screen is fixed.

Remove the Lock Screen Fingerprint Of Your Motorola Razr 40

Users of Android phones can benefit from data and file protection tools like passwords, patterns, and PINs. But there are also some significant disadvantages, for example:

• Someone may have repeatedly entered the wrong password to access your phone.
• You may have forgotten the PIN on your device, pattern, or PIN.
• The lock screen fingerprint can also malfunction if there are repeated tries from an unauthorized finger.

If you use a wrong password or a fingerprint unlock, it can permanently lock your Android device.

We can use many practical methods to remove the Android phone lock screen fingerprint. For example:

According to you, the most typical or initial option must be factory reset. However, when you try the factory reset method, you will lose all data on your phone. So, can you unlock an Android phone without a factory reset? Yes, we will tell you how to unlock your phone without fingerprint and resetting your Android phone.

Follow these methods to bypass the fingerprint lock without resetting the phone. It will save you from losing your data. All our methods are very easy and safe.

Useful Methods to Bypass Fingerprint Lock

1. Restart your Phone

If your fingerprint is not working or the Motorola Razr 40 device prompts you with an error in the fingerprint functioning, possibly the fingerprint reader is not responding, and the Motorola Razr 40 device needs to restart to get rid of this error.

When a device restarts, the fingerprint functionality is restored after entering the Motorola Razr 40 device pattern, password, or PIN. This is the simplest method to reset your fingerprint hardware.

Click here

2. Remove your phone battery

Old android phones have removable batteries. If you can remove your phone battery, remove it and then put it back. Now turn on your phone. Doing so can help solve the fingerprint lock issue if there are bugs or system errors.

3. Dr.Fone - Screen Unlock

On Android handsets, you can attempt Dr.Fone to remove the fingerprint without professional skills. It allows you to delete the password, PIN, pattern, and fingerprint from an Android phone.

Step 1: Connect your Android device.

Open Dr.Fone on your PC, then among all the tools, choose “Screen Unlock.”

Step 2: Select a device type.

We are in this part to provide you with two ways to unlock practically any Android handset, including those made by Samsung, Huawei, OPPO, Vivo, Lenovo, LG, and others. It’s crucial to choose the right device brand to unlock the lock because the recovery modes for various phone models vary. The list contains every supported device model.

Here you will have some brands to choose from, don’t make it wrong.

Step 3: Put your device into Recovery Mode.

You will learn how to put your device into Recovery Mode; it’s important to do as instructions, although this part may look a little strange. And there are 3 different Samsung Recovery Modes as examples.

(Get into Recovery Mode in Samsung phone with Bixby)

(Get into Recovery Mode in Samsung phone without Bixby)

(Get into Recovery Mode in Samsung phone with the Home button)

Step 4: Instructions to Wipe Cache Partition

In this part, it is the final but crucial step to unlock your device; if you click any wrong button, your phone may not work anymore.

OK, you already passed the unlock process; locks like pattern, password, or fingerprint disappear!

4. Hard Reset your Device

Users of Android smartphones and tablets can troubleshoot various issues with their devices using a feature known as Android Recovery Mode. For example, it might be helpful if you discover that your device is functioning strangely. Recovery Mode Android technically refers to a unique bootable partition with a recovery application installed inside it.

However, users can also use it to reset the android password if it is forgotten. This password also includes fingerprint locks. The instructions for resetting android devices through recovery mode differ for every android device.

5. Google Find My Device

As you are likely aware, every Android device is connected to a Google account. As a result, if you’d like, you may also use it to unlock Android. You’ll need to know your Google account login information for this. When you’re ready, use these instructions to find out how to unlock a phone password.

1. Login using your Google credentials by going to the official Google Find My Device website.
2. You will see the gadgets connected to your Google account as you enter the interface and a map of where they are.
3. To wipe the Motorola Razr 40 device, click the ERASE DEVICE option on the left side panel. You will then be required for your password.
4. Once more, select “Erase.” This will reset the Motorola Razr 40 device and get rid of the dysfunctional fingerprint lock.

6. Seek Help from Local Dealers

It might be a complicated case if you cannot reset your lock screen fingerprint through the methods described above. In this situation, you need to visit your nearest mobile technician, who can help you restore your device.

Why does not Fingerprint Work

Click here

1. Fingerprint Hardware Module Problems

The fingerprint module should be clean, just like a clean finger is. Unfortunately, the module would collect liquid from your fingers, especially if you had used a moisturizer earlier, making it difficult for the sensor to read your fingers accurately.

Please inspect the fingerprint module for any fluids or debris and clean it with a dry cloth to resolve this. If the dirt is on the module, clean it with wipes or a moist cloth wet with water.

2. Software Update

Another software-related issue that may occur because “ fingerprint sensor not working” issue is a software defect. Try checking if you have a pending update on your device and install it. Moreover, if the problem started after a system update, you may wait for a new update to fix the problem or go back to the previous update.

To install an update, open the Settings app, tap on ‘System,’ pick ‘System Update,’ and download and install any pending update.

3. Clean your Screen

If you have a device with under-display fingerprint scanner, you might need to clean the screen properly before using the fingerprint. In some cases, screen protectors also interfere with fingerprint functioning.

Conclusion

Any method can solve the problems of using your device with your Android handset. The best thing about these solutions is that you don’t need difficult professional skills to complete the tasks. Dr.Fone-Screen Unlock is the easiest way to help your device if you have a password or fingerprint problem.

The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Motorola Razr 40 Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Motorola Razr 40 device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove four-screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Motorola Razr 40 device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

Click here

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.

Also read: