How to Unlock Lava Blaze 2 5G Phone with Broken Screen

Seeing as the only way to control your Lava Blaze 2 5G deviceis the touch screen, a broken device can cause you a lot of worries. Most people think that there is no way to get their device to work again let alone be able to unlock it if the screen is broken or cracked . It is, however, important to find a way to unlock the broken device so that you can gain access to your data and create a backup to restore to a new device.

In this article, we are going to look at a few simple ways you can unlock an Android device with a broken screen.

Here is a video for you to learn how to unlock Android phone or access phone with broken screen:

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Method 1: Using Android Debug Bridge (ADB)

For this method, you will need your device and access to a PC. It is the most powerful method to unlock a broken Android device. It will however only work if you have enabled USB debugging on your android phone. If you haven’t, skip this method and see if method 2 or 3 might be of help.

ADB creates a bridge between the PC and your device which can then be used to unlock the Lava Blaze 2 5G device. Here’s how to use this bridge.

Step 1: Download the Android SDK package on your PC. You can download it here: http://developer.android.com/sdk/index.html . Extract the ZIP file on your PC.

Step 2: Download the necessary drivers for your device. The USB drivers for your device can be found on the manufacturer’s website.

Step 3: Launch Command Prompt on your PC and change the location of the ADB file. Type in the following into Command Prompt; cd C:/android/platform-tools

Step 4: Connect the Lava Blaze 2 5G device to your PC using USB cables. Enter the command “ ADB _device_” (without quotation marks). If your phone is recognized, you will see numbers in the Command Prompt message.

Step 5: Type in the following two commands. You will need to type in the second one immediately after the first. Replace 1234 with your password.

ADB shell input text 1234
Shell input key event 66

Step 6: Your phone will now be unlocked and you can proceed to back up its contents.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Phones Without Android Factory Reset Codes

• It enables your Android phones to get safe, simple, and trustful after reset.
• It is still helpful even though you don’t know the OS version of your devices.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate.

4,008,670 people have downloaded it

Method 2: Using a USB Mouse and the On the Go Adapter

This is a great solution if you don’t have USB debugging enabled on your device. You will need your device, an OTG adapter and a USB mouse. It involves connecting the Lava Blaze 2 5G device to the USB mouse using the OTG adapter. Check if your device can be connected to a USB mouse. You can find an OTG adapter online, they are relatively inexpensive and very useful.

Before we begin, it is a good idea to ensure your device is sufficiently charged because the Mouse may drain your battery.

Step 1: Connect the Micro USB side of the OTG adapter to your device and then plug in the USB mouse to the adapter.

Step 2: As soon as the Lava Blaze 2 5G devices are connected, you will be able to see a pointer on your screen. You can then use the pointer to unlock the pattern or enter the Lava Blaze 2 5G device’s password lock.

You can then go about backing up the contents of your device.

Method 3: Using your Samsung Account

This method is a reliable way to unlock a Samsung device that has a broken screen or is not working correctly. While it is highly effective you will need to have a Samsung account registered with your device. The problem is that not many Samsung device users have registered their devices with the service. If you are among the lucky few who have, here’s how to use your account to unlock your device.

Step 1: Visit the https://findmymobile.samsung.com/login.do on your PC or any other device and log in with your account information.

Step 2: Select your device from the menu on the left-hand side of the screen.

Step 3: You should see the option “Unlock my screen” on the sidebar. Click on it and you will get instructions on how to access your device.

Conclusion

Being unable to unlock your device is never a good place to be. We hope one of the above solutions will work for you. You can then gain access to your device and back up the files and contacts. This way your life doesn’t have to be disrupted- you can just restore the backup on a new device or the old one once the screen is fixed.

Top 12 Prominent Lava Blaze 2 5G Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Lava Blaze 2 5G can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Lava Blaze 2 5G fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Lava Blaze 2 5G device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Lava Blaze 2 5G device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Lava Blaze 2 5G device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Lava Blaze 2 5G device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Lava Blaze 2 5G device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Lava Blaze 2 5G fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Lava Blaze 2 5G device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Lava Blaze 2 5G device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Lava Blaze 2 5G device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Lava Blaze 2 5G fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Lava Blaze 2 5G device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Lava Blaze 2 5G device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Lava Blaze 2 5G fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Lava Blaze 2 5G .

Lock Your Lava Blaze 2 5G Phone in Style: The Top 5 Gesture Lock Screen Apps

Ever wondered, if there was an easier and more interesting way to unlock and open your devices and apps without boring PINs/Passwords that you tend to forget? Worry not, gestures are here! Imagine the joy when you can unlock your phone by just waving your hand over it, or instead of getting access through confusing patterns or lengthy PINs, you can just get in by drawing an alphabet! So let’s go through some gesture lock screen apps for Android phones.

Gestures in Android

Gestures have become an iconic piece of the entire mobile operating system and experience, giving all Android users the joy of using our gestures for functions in our mobile phones We will be discussing 5 gesture lock screen apps, but let us first talk about the existence of gestures in Android.

• • Two-finger swipe down
• • Press and hold on notifications
• • Triple-tap to zoom in
• • Tap and hold on menus
• • Double-tap to wake
• • Press and hold Power Off Button

These gestures gave Android developers an idea of creating apps, to make use of new gestures for not only in-phone functionality but also for the most basic smartphone function of locking and unlocking.

Why do we need these gesture apps? –Would you not want to control your phone’s notification bar by just waving your hand over the screen, when it’s not reachable? These apps are not only fun but also useful and efficient. So, now let us discuss 5 Android gesture lock screen apps.

1) Gesture Lock Screen

A top-rated app in the Google Play Store, for gestures, the Gesture Lock Screen is a wonderful gesture app that locks and unlocks Android lock screens. Rated 4/5 stars in the Google Play Store, this app was developed by Q Locker.

Gesture Lock Screen is an all-in-one gesture app that locks the screen as well as provides you with other good features. The app allows you to draw anything or gesture to unlock your phone; you can draw letter, signatures, various shapes, whatever you want to unlock your device! This app gives you the convenience to unlock your phone through fingerprints, gestures, and recover passwords as well.  

• Gesture – you can easily add/change gestures, it can be a single or a multiple stroke gesture as well. For maximum accuracy, this app features gesture sensitivity. If you want a unique lock screen, this app is ideal!

• Customization – This app is highly customizable, so let your creative tech ideas fly! App notifications are available for Android 4.3 and above. Unread notifications will appear on the lock screen, and you can easily hide any confidential notifications.

With over 40,000 5/5 ratings and 5,00,000-10,00,000 installs, this app proves to be the top gesture app for locking your phone.

Download this app from here - https://play.google.com/store/apps/details?id=qlocker.gesture&hl=en

2) Magic Unlock

Magic Unlock app, developed by zonep.ro, is designed with the main aim of responding to hand movement. The future is here!The app detects the movements of your hand, preferably horizontal or vertical, through the phone’s proximity sensor and then opts to unlock the screen. Technology, I tell you!

Firstly, the lock screen security needs to be turned off. You can do this by going to Settings on your phone, then click on Security, then “Screen Lock” and change the lock type to swipe or slide. Now, fire up this app and turn on the magic unlock option. Tada! Now you are all set to unlock your device via air gesture.

The app was released early 2017, but Magic Unlock has already received 50,000-100,000 installs and has a 4.2/5 rating in the Play Store, giving you all the more reason to install it. The app requires Android 4.1 and above.

Download the app from here - https://play.google.com/store/apps/details?id=com.binarybuilding.magicunlock&hl=en

3) Gesture Magic

Another app that uses gesture to lock/unlock the screen is the Gesture Magic app, developed by Apps2all. Compatible with most Android devices, this app is very easy for you to use.

The app already suggests you with predetermined gestures to unlock the screen and open the specific apps. How convenient!

Features – Don’t we all love apps that do not just stick to their main purpose but also come with extra features? This app allows you to launch apps, make calls, send text messages, and quickly access all applications with ease, everything with the help of gestures!  This app needs to use the Lava Blaze 2 5G device Administrator permission in order to work.

Launched on 17th August 2017, the app has already fetched 100,000-500,000 installs and has maintained a 4/5-star rating, proving why it’s worth using despite being a new-comer.

Download this app from here - https://play.google.com/store/apps/details?id=com.gesture.action&hl=en

4) Gesture Lock Screen

Developed by Prank App, Gesture Lock Screen is a wonderful app that allows to securing your Android phone with letters, signatures or a pull-down gesture. This is an intelligent gesture screen-lock app that detects and adjusts to the letters that are created every time and stored as lock screen passwords. You can be creative with this app as well; hearts, circles, triangles, squares, make any shape, letter, number and save it as the gesture lock.

Gesture Lock Screen is designed to allow you to launch any personal application through your personalized gesture, so you do not have to worry about anyone meddling with the contents of your phone. The app comes with the following range of features:

• Create any kind of password – letters, shapes, numbers, signatures, etc.

• App notifications appear on the lock screen itself - unread texts, calls, app notifications, etc.

• Double tap the notification, draw the gesture to unlock and open the app – privacy, finally!

• Supports both single as well as multiple stroke gesture.

With a 4.4/5-star rating in the Play Store, and with 5,000-10,000 downloads in a span of 2 months of its launch. The app works on Android 4.1 and above.

Download it from - https://play.google.com/store/apps/details?id=com.vasu.gesturescreenlock&hl=en

5) Gestos – Gestures

Developed by Imaxinacion, Gestos-Gestures is an amazing gesture screen-lock app, designed with the main aim of providing you with fluency and speed as you perform actions on your device. This app aims to give you the facility of accessing various functions by drawing an easy gesture on the lock screen.

Gestos allows you to – call contacts, enable or disable settings like Wi-Fi, Bluetooth, GPS, etc, run various system options, lock or unlock your device, and access websites as well.

Talking about configuration, Gestos is a well-designed app that can be activated by just a double-touch on your home screen. Its sensitivity can be adjusted according to what you prefer, a permanent notification toggle floating button is available as well!

Maintaining a 4.1/5-star rating in the Play Store, Gestos has had 100,000-500,000 installs.

Download it from here - https://play.google.com/store/apps/details?id=com.imaxinacion.gestos&hl=en

As Android reaches new heights every year, gestures are getting more and more enhanced, as their functionalities increase as well. Gestures have always been an exciting feature in Android phones and a convenient one as well. They are practical and fun to use, and the apps mentioned above are some of the best gesture-lock apps amongst the vast number of such apps in the Google Play Store. If you want to make your tasks easier by using gestures on your phone, feel free to try some of the mentioned apps here.

Also read: