How to Unlock Asus ROG Phone 7 Phone with Broken Screen

Seeing as the only way to control your Asus ROG Phone 7 deviceis the touch screen, a broken device can cause you a lot of worries. Most people think that there is no way to get their device to work again let alone be able to unlock it if the screen is broken or cracked . It is, however, important to find a way to unlock the broken device so that you can gain access to your data and create a backup to restore to a new device.

In this article, we are going to look at a few simple ways you can unlock an Android device with a broken screen.

Here is a video for you to learn how to unlock Android phone or access phone with broken screen:

Method 1: Using Android Debug Bridge (ADB)

For this method, you will need your device and access to a PC. It is the most powerful method to unlock a broken Android device. It will however only work if you have enabled USB debugging on your android phone. If you haven’t, skip this method and see if method 2 or 3 might be of help.

ADB creates a bridge between the PC and your device which can then be used to unlock the Asus ROG Phone 7 device. Here’s how to use this bridge.

Step 1: Download the Android SDK package on your PC. You can download it here: http://developer.android.com/sdk/index.html . Extract the ZIP file on your PC.

Step 2: Download the necessary drivers for your device. The USB drivers for your device can be found on the manufacturer’s website.

Step 3: Launch Command Prompt on your PC and change the location of the ADB file. Type in the following into Command Prompt; cd C:/android/platform-tools

Step 4: Connect the Asus ROG Phone 7 device to your PC using USB cables. Enter the command “ ADB _device_” (without quotation marks). If your phone is recognized, you will see numbers in the Command Prompt message.

Step 5: Type in the following two commands. You will need to type in the second one immediately after the first. Replace 1234 with your password.

ADB shell input text 1234
Shell input key event 66

Step 6: Your phone will now be unlocked and you can proceed to back up its contents.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Phones Without Android Factory Reset Codes

• It enables your Android phones to get safe, simple, and trustful after reset.
• It is still helpful even though you don’t know the OS version of your devices.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate.

4,008,670 people have downloaded it

Method 2: Using a USB Mouse and the On the Go Adapter

This is a great solution if you don’t have USB debugging enabled on your device. You will need your device, an OTG adapter and a USB mouse. It involves connecting the Asus ROG Phone 7 device to the USB mouse using the OTG adapter. Check if your device can be connected to a USB mouse. You can find an OTG adapter online, they are relatively inexpensive and very useful.

Before we begin, it is a good idea to ensure your device is sufficiently charged because the Mouse may drain your battery.

Step 1: Connect the Micro USB side of the OTG adapter to your device and then plug in the USB mouse to the adapter.

Step 2: As soon as the Asus ROG Phone 7 devices are connected, you will be able to see a pointer on your screen. You can then use the pointer to unlock the pattern or enter the Asus ROG Phone 7 device’s password lock.

You can then go about backing up the contents of your device.

Method 3: Using your Samsung Account

This method is a reliable way to unlock a Samsung device that has a broken screen or is not working correctly. While it is highly effective you will need to have a Samsung account registered with your device. The problem is that not many Samsung device users have registered their devices with the service. If you are among the lucky few who have, here’s how to use your account to unlock your device.

Step 1: Visit the https://findmymobile.samsung.com/login.do on your PC or any other device and log in with your account information.

Step 2: Select your device from the menu on the left-hand side of the screen.

Step 3: You should see the option “Unlock my screen” on the sidebar. Click on it and you will get instructions on how to access your device.

Conclusion

Being unable to unlock your device is never a good place to be. We hope one of the above solutions will work for you. You can then gain access to your device and back up the files and contacts. This way your life doesn’t have to be disrupted- you can just restore the backup on a new device or the old one once the screen is fixed.

Top 12 Prominent Asus ROG Phone 7 Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Asus ROG Phone 7 can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Asus ROG Phone 7 fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Asus ROG Phone 7 device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Asus ROG Phone 7 device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Asus ROG Phone 7 device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Asus ROG Phone 7 device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

Click here

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Asus ROG Phone 7 device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Asus ROG Phone 7 fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Asus ROG Phone 7 device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Asus ROG Phone 7 device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Asus ROG Phone 7 device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Asus ROG Phone 7 fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Asus ROG Phone 7 device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Asus ROG Phone 7 device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Asus ROG Phone 7 fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Asus ROG Phone 7 .

How to Reset a Locked Asus ROG Phone 7 Phone

There might be some moment when you have accidentally locked your phone and have no way to recover the phone’s functionality without resetting. This moment is very much irritating to any of you. If your phone is locked, and you can’t run your phone due to forgetting the password, you don’t have to be dumbfounded. There are some ways by which you can recover your phone to its previous state. In this article, we will show you how to reset a locked phone.

Part 1: How to Hard Reset Locked Asus ROG Phone 7 Phone

The most common way of resetting an Android phone screen lock is by hard reset. You can hard reset your Android phone to unlock it. Remember, hard reset will erase all the data stored on your phone. So hard reset will unlock your phone, but you will not get your stored data back on it. So if you have no recent backup for your phone data, beware of that before going for a hard reset.

Here you can learn how to reset a locked phone from different brands, as different models or brands have unique methods of resetting.

1. How to reset a locked HTC phone?

Now we will show you how to unlock HTC phone by hard reset.

You will have to press and hold the volume down button along with the power button. Keep holding until you see Android images. Then release the buttons and then follow the volume down button to go for factory reset, afterward select the power button.

2. How to reset a Samsung phone that is locked?

Press and hold the volume up key, along with the power button and home key. You will see the Samsung logo onscreen. Go down to wipe data/factory reset by holding the volume down key. Now choose Yes. You could delete all the data on your phone by tapping on the volume down key. Your phone will start rebooting.

3. How to reset an LG phone that is locked?

To unlock your LG Android phone, you will have to press and hold the volume key and the power or lock key. You have to release the Lock or power key when you see the LG logo on the screen of your phone. Just after that, press and hold the power or lock key again. You can release all the buttons once you see a factory hard reset on the screen.

4. How to reset a locked Sony phone?

You have to confirm that your phone is switched off. Press and hold three keys altogether. The keys are Volume Up, Power, and Home keys. You have to release the buttons once you see the logo on the screen. Now follow volume down to scroll down. Power or Home key is used for selection. Choose factory reset or wipe data.

5. How to reset a locked Motorola phone?

Firstly, switch off your phone. Then press and hold the power key, home key, and volume up key. After a while, you will see the logo on the screen, just then release all the buttons. For scrolling, you can use the volume down key, and for selecting, you can use either home or power key. Now select factory reset or wipe data.

Whatever your model or brand is, keep in mind that hard reset will delete all your valuable data from your phone! So if you want to unlock your locked phone without losing data from it, then follow the next part.

Part 2: Reset Android Phone Screen Lock Without Password

In this part, we will discuss Wondershare Dr.Fone for unlocking your locked Android device. Here are some of the features of this great software -

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Huawei, LG, Xiaomi, etc.
• No tech knowledge required. Everyone can handle it.

3981454 people have downloaded it

Here is the step-by-step procedures for unlocking your Android phone - other Android phones can also be unlocked with this tool

Step 1. Go for “Screen Unlock”

The first thing that you will have to do is open Dr.Fone on your PC and then click on Screen Unlock that allows your device to remove the password from any of the 4 types of lock screens (PIN, Password, Pattern, and Fingerprints).

Step 2. Select the Asus ROG Phone 7 device from the list.

Step 3. Go for Specific Mode

Step 4. Remove Lock Screen without Password

Once the previous step is complete, you will see the lock screen removal process started. After completing the lock screen removal process, you could enter into your phone without needing any password.

safe & secure

Conclusion

Forgetting your password is a perplexing situation though you have the solution to unlock your Android phone, as hard reset does not give your data back, you should rely on the software called Dr.Fone - Screen Unlock (Android) for smooth operation. So have the software and cheer up. I hope you will enjoy and forget about the hassle when you lost your password.

Also read: