How Can We Unlock Our Lava Yuva 2 Phone Screen?

A phone lock acts as your Android phone’s shield against unauthorized users. Some users have new security features, such as fingerprint impression unlocks for an Android lock screen.

However, certain people like to create a PIN and password on their Google account as their Android screen lock. It tends to be distressing and tedious when you fail to remember the code of your Android phone. Surprisingly, being fully locked out of your device is awful. Also, it can be hard at first to unlock your Android.

Anyway, no one can escape such a situation. Yet, sit back and relax! We know several techniques on the best way to unlock your phone and set a screen lock. You can attempt software like Wondershare Dr.Fone - Screen Unlock for Android to assist you with unlocking your phone in a couple of steps. Besides this, there are various other ways.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: What Is Your Lava Yuva 2 Phone Lock System?

There are three types of standard lock types available for Android. You can set a PIN/password, fingerprint, or a pattern as your phone lock. All have their pros and cons. However, everyone should select the ideal one based on their liking and ease of use.

Once you decide on the phone lock type, you can enable or disable them from the Security tab in your Android phone’s settings. After you set a screen lock, your Android will require it every time you try to open your device.

Here you will see how to set up a screen lock on your Android device:

Part 2: Quickly Unlock Your Screen By Dr.Fone

Dr.Fone - Screen Unlock

For a quick, easy, and hassle-free unlocking experience, we suggest you download Dr.Fone - Screen Unlock. Dr.Fone not only unlocks your phone but keeps your data secured during the process. It has a simple interface, and even an amateur can use it to unlock their device.

So, look no further if you want to remove your Android screen lock in just a few clicks. Install Dr.Fone and enjoy using your device again.

Dr.Fone - Screen Unlock (Android)

The Best Tool to unlock Android Phone Screen!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise success rate.

4,008,672 people have downloaded it

Step 1. Open Dr.Fone on your PC and select the “Screen Unlock” tool.

Step 2. Select Unlock Android Screen

This is the page to start your unlock process with two options here, please select” Unlock Android Screen” to unlock your device screen.

Step 3. Select device model

For most Brands, it should be “100% Remove Screen Lock”. These two solutions unlock screens for almost all Android devices, for example, Samsung, Huawei, OPPO, Vivo, Lenovo, LG, etc.

In the supported device brands list, please find the right one for you.

Step 4. Enter into Recovery Mode

Before unlocking your device screen, the instructions below are here to help you to get into Recovery Mode. We take 3 Samsung phones as an example.

Get into Recovery Mode on Samsung phone with Bixby:

Get into Recovery Mode on Samsung phone without Bixby:

Get into Recovery Mode in Samsung phone with Home Button:

Step 5. Instructions to Wipe Cache Partition

During the steps in Recovery Mode, please don’t pick the wrong choices!

You’re now able to access your Android device again when the whole process is over. And you no longer need a password or pattern!

Part 3: Solutions to Unlock Android Screen

1. Google Find My Device

Step 1: Open the “Find my Device” webpage from a browser on your PC.

Step 2: Click “Erase my device,” which you will see on the left half of your screen. After affirming the Delete capability, your phone will boot into recovery and begin playing out a production line reset. It is difficult to stop or drop on your android gadget when you endorse this activity. Regardless of whether you shut down your Android phone - the reboot will continue on startup.

2. Recovery Mode

Depending on your phone, the steps for this process might vary a little. Most phones will allow you to reset by getting to the recovery mode. Follow the steps below to remove the Android screen lock:

Step 1: Turn on the Lava Yuva 2 device and enter the boot menu. If you want to know how to do so, you can do a speed search on the internet.

Step 2: Access the safe mode, use the volume keys to navigate, and press the Power key to click.

Step 3: Search for the Wipe Data option and select it.

After that, your Android will start the process, which can require a few minutes. However, this process will erase all your user data.

3. Use ADB

This method is very confusing, so follow the steps cautiously on your Android phone to remove the phone lock. With your phone connected to your PC, and the cmd open, type the accompanying commands altogether:

• adb shell
• disc/data/data.com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where name=’lock_pattern_autoblock’;
• update system set value=0 where name=’lockscreen.lockedoutpermanently’;
• .quit

After you’ve finished this, reboot your Android phone. If this doesn’t reset your lock screen, proceed to the following stage.

With your Android phone connected and the cmd opens, enter:

• abd shell rm/data/system/gesture.key

After entering, reboot your phone once more.

4. Boot into Safe Mode

Step 1: For most phones and your Android, you can do this by opening the power menu and holding the “Power Off.” A message will spring up on your screen, asking whether you might want to Reboot to Safe Mode. Press Ok.

Step 2: Clear data from your lock screen application, uninstall and reboot your phone to escape the Safe mode. When you do so, your Android screen lock will unlock.

5. Crash Lock Screen

This strategy to sidestep a locked screen is only a crisis workaround for the phones in this classification.

• Enter ten asterisks (*) through the dialer application.

• Copy and paste asterisks on the dialer until the “Paste” choice no longer appears.
• Get back to the lock screen and tap on the camera symbol.
• Go to the settings on your Android after pulling down the notifications bar. Now you will have the chance to enter the password, and you must continue the same thing here. Continue to paste until the Android lock screen crashes.

Conclusion

Passwords shield our phones from unapproved access, yet we get locked out unexpectedly on our phone lock. Failing to remember your PIN can be irritating. However, we can assist you in reaccessing your locked phone without a factory reset by using Dr.Fone - Screen Unlock. Dr.Fone is an expert in solving such problems in just a few minutes. So download this expert tool immediately for a quick solution.

How to Bypass Android Lock Screen Using Emergency Call On Lava Yuva 2?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Lava lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Lava Phone

All Lava devices come with the “Find My Mobile” feature. To bypass the Lava lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

• Step 1. First, set up your Lava account and log in.
• Step 2. Click the “Lock My Screen” button.
• Step 3. Enter a new PIN in the first field
• Step 4. Click the “Lock” button at the bottom
• Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Lava Password

To know how to unlock a Lava phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

• Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
• Step 2. Log into your Google account that you used on your locked device.
• Step 3. Choose the Lava Yuva 2 device you want to unlock in ADM interface
• Step 4. Click on the “Lock” option.
• Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
• Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
• Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
• Step 8. Go to lock screen settings on your device and disable the temporary password.

Method 3. Google Login (Supports Only Android 4.4 or Lower)

If your device is still running on Android 4.4 or lower, here’s how to bypass the Lava lock screen fast.

• Step 1. Enter the wrong pattern for five times
• Step 2. Choose “Forgot Pattern”
• Step 3. Enter your Google account login or backup PIN
• Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Lava lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Lava Yuva 2 device is locked.

• Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Lava device.
• Step 2. Insert the card on your device
• Step 3. Restart your device into recovery mode.
• Step 4. Flash the file on your card and restart the phone.
• Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Lava lock screen.

• Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
• Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Lava Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Lava Yuva 2 device completely to start the process. But this method will delete all the precious data on the Lava Yuva 2 device after the factory reset.

• Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
• Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
• Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
• Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
• Step 5. Select it by pressing the Power button.
• Step 6. Select “Reboot System Now” once the process is done.

Backup your Lava phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Lava lock screen. Specifically, you can boot your Lava device into Android Safe Mode .

• Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
• Step 2. It will ask if you want to boot in safe mode. Tap “OK”
• Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
• Step 4. Uninstall the third-party lock screen or just reset the data.
• Step 5. Reboot your device and get out of safe mode.
• Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

• Step 1. Take your friend’s phone to call on your locked phone.
• Step 2. Accept the call and press the back button without disconnecting.
• Step 3. Now you can access the Lava Yuva 2 device completely
• Step 4. Go to the security settings of the Lava Yuva 2 device and remove the pattern or pin.
• Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Lava lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

Tips and Tricks for Setting Up your Lava Yuva 2 Phone Pattern Lock

Failing to remember the pattern lock of a phone is one of the most puzzling situations for Android users. Unlike the famous OS, Android gives a seamless method to eliminate the issue.

You can attempt the methods below or an expert tool if you have forgotten the pattern lock on your gadget and reset it. However, we suggest you try Dr.Fone - Screen Unlock for a quick and safe solution. To make things more straightforward, we have given you other techniques as a workaround to the issue.

So, keep following us to unlock the lock screen pattern and use your phone again.

Part 1: What Is Android Pattern?

A pattern lock is used to identify the actual user by your Android phone. It is a widely used phone locking system and a secured one. Simply put, a pattern lock includes a line pattern you choose that you can draw to unlock a lock screen. You can enable this lock screen feature from the security menu in the settings application.

So, if you have set a pattern lock as a screen lock for your device, you will need to draw the exact pattern every time you log in.

Part 2: Best Tool to Unlock Your Pattern

Dr.Fone - Screen Unlock

The most effective and quick tool to unlock a pattern lock is Dr.Fone - Screen Unlock by Wondershare. Dr.Fone is an all-in-one tool for all your Android needs and has been in the business for a long time. We suggest you use Dr.Fone. The following steps will help you unlock your device:

Step 1. Select the “Screen Unlock” option in the Dr.Fone interface.

Step 2. Select Unlock Android Screen

To unlock the pattern lock on your device, the “Unlock Android Screen” will guide you to finish the whole process.

Step 3. Select unlock mode

If you click “Remove without Data Loss,” only some limited Samsung or LG phone models can be unlocked without losing data. To unlock most phone brands’ screens, “100% Remove Screen Lock” is a better choice.

You can find the brand compatible with your phone in the following list.

Step 4. Go into Recovery Mode

Read the program instructions carefully; entering recovery mode is the prerequisite to unlocking the pattern lock.

(Here are 3 examples of Samsung phones)

How to get into recovery mode with Bixby

How to get into recovery mode without Bixby

How to get into recovery mode with Home button

Step 5. Instructions to Wipe Cache Partition

Now you’re in recovery mode, pick these options in the image below.

When the “Unlocked successfully” appears on the screen, you can access your device without a pattern lock or other locks!

Part 3: How to Bypass Android Pattern When You Forgot It?

1. Google Find My Device (For Android7.1.1 or later)

Step 1. Open the Android Device Manager site by typing https://www.google.com/android/find in an internet browser.

Step 2. You must give your Google ID credentials to sign in. Remember that this should be a similar Google account connected to your phone.

Step 3. After logging in, select your device.

Step 4. You will get three choices here, i.e., lock, erase, and ring.

Step 5. Click on the “Lock” button to reset its pattern.

Step 6. It will open another spring-up window. From here, you can give the new password to your phone.

Step 7. After affirming your PIN/password, you can give a recovery message and number (in case of theft only).

Step 8. Complete the process and sign out of your account on the browser.

2. Forgot Pattern (For Android 4.4 or earlier)

Step 1. First and foremost, give some wrong patterns to your phone. It will tell you that you attempted the incorrect pattern lock.

Step 2. On a similar window, click the “Forgot pattern” choice on the base.

Step 3. That will open another screen, which you can use to sidestep the forgotten pattern of Android. Select the choice for entering the Google Account credentials and continue.

Step 4. To reset the lock screen pattern, you must give the correct details of the Google ID previously logged into the Lava Yuva 2 device.

Step 5. After giving the correct details, you can provide another pattern lock to the phone.

Step 6. Affirm your decision and set another pattern lock on your phone.

3. Emergency Call Trick (For Android 5 or 5.1.1)

Step 1: Tap the Emergency Call button and enter ten asterisks (*).

Step 2: Copy and paste the asterisks on the dialer until you no longer see the paste choice.

Step 3: Return to the lock screen and tap on the camera symbol.

Step 4: Press the settings choice on your Android gadget after pulling down the notification tray. Now you will have the chance to enter the PIN/password, and you ought to continue unlocking your Android phone. Continue to paste until the lock screen UI crashes.

4. Safe Mode Boot (For Android 4.1 or later)

Step 1: You can bring up the power menu and hold the “Power Off” button for most phones, especially Android phones. A warning will spring up, asking whether you might want to Reboot to Safe Mode. Here, it would help if you had to press Ok.

Step 2: Clear your lock screen application’s data.

Clean data off your lock screen app, uninstall it, and then reboot your device to escape safe mode. When you do so, your phone or Android device will unlock.

5. Use ADB (USB required for Android 10 and lower)

• Connect your device to your PC using a USB connector.
• On your PC, open a terminal window (or command prompt).
• Type in the commands given below. Press Enter after each line:

adb shell

album/data/data/com.android.providers.settings/databases

sqlite3 settings.db

update system set value=0 where name=’lock_pattern_autolock’;

update system set value=0 where name=’lockscreen.lockedoutpermanently’;

.quit

exit

adb reboot

• After your gadget has rebooted, enter the command below:

adb shell

rm/data/framework/gesture.key

exit

adb reboot

• Your phone will reboot. After it reboots and requests a security pattern, you can utilize any pattern, and it will unlock.

Conclusion

This guide provides insight into the most common Android issue. Here, we have discussed different techniques to bypass the pattern lock on your Android phone. However, we suggest you go for a professional tool while carrying this out. Therefore, you should choose an expert tool like Dr.Fone - Screen Unlock to open the lock screen pattern.

Also read: