Full Tutorial to Bypass Your Lava Blaze Curve 5G Face Lock?

Your android phone face unlock may be buggy, or the camera may be damaged. It can’t recognize your face. When you try multiple times in such cases, it will lock your device permanently. Are you stuck with a locked phone? And you’re still confused about what just happened. Face unlock may face problems such as

• Face unlock app may be buggy
• Your face unlock settings may be unstable
• Your phone camera or face unlock sensor may be damaged
• Someone else may have registered their face without your permission

Whatever the reason, they are equally big obstacles for you to use your phone as usual; trying to unlock your device can lead to a permanently locked phone. So how do you bypass face unlock?

Follow the guide below to bypass the face unlock settings and choose the best one for yourself.

How To Bypass Android Face Lock by Ourselves?

If you want to bypass face lock by yourself, then different methods can help you. These are all tested and work well.

1. A Picture Possibly Bypasses Face Lock

You can use your photo to manipulate the face lock app. Simply use your photo to unlock the phone, which should work fine. If your phone doesn’t recognize your face from a photo, try again.

If it still doesn’t recognize your face, try a different photo or even change the camera’s lighting settings or the angles to see if that helps.

Anyway, this method is still unstable because of many uncontrollable factors. If everything fails, consider the following methods to bypass the face lock.

2. Hard Reset your phone

To get around the Android lock screen, perform a factory reset. While resetting your phone allows you to set a new password, it also erases all data from your device. This method works like a charm, but it also requires more technical knowledge. To bypass screen lock via factory reset, follow these steps.

Step 1: Turn off your phone and hold the Power and Volume-down buttons simultaneously until the recovery mode screen appears. There are minor variations depending on the brand and model.

Step 2: Select the Wipe data/Factory Reset option using the volume buttons. To confirm the option, press the Power button.

Step 3: Choose Yes > Delete All User Data, then press the power button to continue. When the process is complete, turn on your phone.

So, before facing such awkward cases, like data loss, we suggest you have a backup habit of keeping your data safe.

3. Google Find My Device

Google Find My Device is a service that lets you remotely lock, track, and wipe data from stolen or lost phones. With a Google account and the password, it won’t be complicated to remove any locks on your phone. You can bypass the Android lock screen by following the steps below:

Step 1: Navigate to Find My Device and sign in with your Google account.

Step 2: Your phone receives a notification.

Step 3: Select Erase Device, confirm, and click Erase as a warning pops up on the screen.

Step 4: The factory reset process on your phone begins. When it’s finished, choose My Google Account instead of using your phone as if it were brand new.

Just like the hard reset, after using Google Find My Device, all your data and settings will be erased. Please make everything well prepared before you decide to unlock your device.

Easiest Way to Unlock Your Android Face Recognition Using Dr.Fone-Screen unlock

The methods mentioned above may be hard for you, and you don’t know any technical skills. If you are looking for an easy tool that can face unlocking for you, then Dr.Fone - Screen Unlock is all you need.

Dr.Fone by Wondershare has many useful tools, and Screen Unlock is one of them. It is the easiest and safest method to bypass the Android face lock. It is safe, secure, and easy to use.

The following guide explains how to use Dr.Fone-Screen unlock to bypass the Android face lock.

Step 1: Install and open Dr.Fone on your computer

Step 2: Run Dr.Fone on your PC and select “Screen Unlock” from the tools

Step 3: Select Unlock Android Screen

Please select” Unlock Android Screen” for the rest process.

Step 4: Select device model

Please click the button fitting your phone.

When arriving at this page, we have a lot of options to unlock your device screen for most phone brands, like Samsung, Nokia, LG, OPPO, etc.

Step 5: Enter into Recovery Mode

Here are examples of Samsung phones via its Recovery Mode to unlock your Android device screen.

(Recovery Mode When the Samsung phone with Bixby)

(Recovery Mode When the Samsung phone without Bixby)

(Recovery Mode When the Samsung phone with Home button)

Step 6: Instructions to Wipe Cache Partition

This step in Recovery Mode is the most important to unlock your screen. Please click the buttons as instruction.

Now you can see your device is unlocked successfully

Conclusion

There are various methods to bypass Android face lock, but Dr.Fone-Screen Unlock is the easiest and safest method. Dr.Fone offers Screen Unlock and many other handy tools to help you recover, remove and unlock your Android phone without geeky knowledge. Dr.Fone-Screen Unlock is a step-by-step process, and you do not need to do anything; Dr.Fone will do all you want to do on your phone!

Top 12 Prominent Lava Blaze Curve 5G Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Lava Blaze Curve 5G can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Lava Blaze Curve 5G fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Lava Blaze Curve 5G device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Lava Blaze Curve 5G device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Lava Blaze Curve 5G device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Lava Blaze Curve 5G device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Lava Blaze Curve 5G device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Lava Blaze Curve 5G fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Lava Blaze Curve 5G device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Lava Blaze Curve 5G device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Lava Blaze Curve 5G device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Lava Blaze Curve 5G fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Lava Blaze Curve 5G device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Lava Blaze Curve 5G device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Lava Blaze Curve 5G fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Lava Blaze Curve 5G .

The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Lava Blaze Curve 5G Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Lava Blaze Curve 5G device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove four-screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Lava Blaze Curve 5G device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.